User manual SONOS BR100

[. . . ] No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Sonos, Inc. Windows VistaTM and Windows® XP are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. This product includes technology owned by Microsoft Corporation and under a license from Microsoft Licensing, GP. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft Corporation and/or Microsoft Licensing, GP as applicable. [. . . ] If you are making a wired connection, connect an Ethernet cable (supplied). If you are making a wireless connection, skip this step and continue. Choose one of the following options: · Use the Desktop Controller software to add the ZoneBridge to your music system by selecting Add a ZonePlayer or ZoneBridge from the Zones menu. Use the Sonos Controller to add the ZoneBridge to your music system by selecting System SettingsAdd a ZonePlayer or ZoneBridge from the Music menu. During the setup process, you will be asked to press and release the Connect button on top of the ZoneBridge. The indicator lights will flash green and white while the ZoneBridge is connecting. Now that you've added the ZoneBridge to your music system-- · If you are replacing the ZonePlayer that is currently attached to your router, you can unplug the wired ZonePlayer, replace it with the Sonos ZoneBridge, and move the original ZonePlayer to a new location. If you are using the ZoneBridge elsewhere in your house to extend your wireless network, you can now move any of your existing ZonePlayers to other locations if desired. Connect the ZoneBridge to your home network by following the steps below. (If you are going to use speakers in this music zone, you can connect a ZonePlayer 100 in step 2 instead. If you would like to utilize an external amplifier or powered speakers in this music zone, you can connect a ZonePlayer 80 in step 2 instead. Connect an Ethernet cable (supplied) from one of the Ethernet switch connectors on the back of your ZoneBridge to an open port on your router. Do not connect the ZoneBridge directly to your cable or DSL modem unless your modem has a built-in router. If you don't have an open port on your router, you can disconnect your computer from the router and connect it to the ZoneBridge instead (see below). Then connect the ZoneBridge into the router port the computer was previously plugged into. The CD-ROM will quickly and easily guide you through the setup process. (If you purchased multiple Sonos components, you may have more than one System Setup CD-ROM--use the one that accompanied your ZoneBridge and you can put the others away. ) Important: When you insert the CD-ROM, you will be prompted to check for software updates. Now that you've set up the ZoneBridge you are ready to add the rest of your Sonos components. Once you've set up your ZoneBridge, you can easily add more components any time. If your house has structured (built-in) wiring, you can make a wired connection to additional ZonePlayers or ZoneBridges. If you don't have structured wiring, our built-in wireless technology is ideal for you. [. . . ] If you are not using a router, visit our Web site at http://faq. If you are still experiencing problems, please contact the Sonos Customer Service Center. Household cleaners or solvents can damage the finish on your Sonos components. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. [. . . ]