User manual SONOS CONTROLLER 200

[. . . ] No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Sonos, Inc. Windows VistaTM and Windows® XP are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. This product includes technology owned by Microsoft Corporation and under a license from Microsoft Licensing, GP Use or distribution of such technology outside of this product is prohibited without a license from . All other products and services mentioned may be trademarks or service marks of their respective owners. [. . . ] To access the online help system included with your software, select Sonos System Help from the Help menu. Touch the Zones button to select a zone to play music in, to view the music selections playing in each room, or to create or modify zone groups in order to share the same music across zones. You can also use the Zones button to lock the Controller so that nothing happens when you touch the screen (such as when cleaning the screen, or carrying the Controller in your pocket. ) To lock the Controller, touch and hold the Zones button for two (2) seconds. Touch the Back arrow to return to the previous screen. Touch Music Menu to browse or select music, access playlists, and change the default settings for a Sonos ZonePlayer or Controller. Note: If the music you've selected is not available (such as an Internet radio station that has dropped off), your alarm will play the Sonos chime instead. Touch Date and Time Settings to select the way in which date and time settings are determined and displayed on this Controller. The following settings can be adjusted by selecting SettingsController Settings from the Music Menu: Lock Controller. You can choose to lock the Sonos Controller 200 so that nothing happens when you touch the LCD touch screen or buttons (such as when cleaning the screen, or carrying the Controller in your pocket. ) When you are ready to unlock the Controller, simply touch and hold the Zones button for two (2) seconds. (You can also lock the Controller by touching and holding the Zones button for two (2) seconds. The Controller 200 makes a clicking sound when you touch a selection. You can choose to turn all sounds on, turn all sounds off, or enable keyboard sounds only by selecting Controller Sounds. Your Controller will go into light sleep (the screen will turn off) to preserve the battery life when it is unused for a specified period of time. when motion is detected or a button is pressed , the Controller awakens immediately. Use the Sleep Timer Docked (when seated in charging cradle) and Sleep Timer Undocked settings to select the amount of time after which your Controller will enter light sleep. Drag your finger across the slider to adjust the brightness of your Controller screen. Drag your finger across the slider to adjust the brightness of the buttons on your Controller. The button brightness is controlled by the light sensor, so the button brightness will vary depending upon your environment (such as whether it's night or day, or whether your are inside or outside your home. The Controller has a motion sensor to automatically wake your Controller when motion is detected. If you wish to disable the motion sensor, select Motion Sensor from the Advanced Settings menu. [. . . ] Insert the battery into the battery compartment with the Sonos logo facing out, Making sure the battery snaps gently into place. Place the Controller into the charging cradle to wake it up. If a problem occurs, you can try the troubleshooting suggestions listed below. If one of these doesn't remedy the problem, or you are not sure how to proceed, please contact the Sonos Technical Support team (see page 16), and we'll be happy to help. [. . . ]