User manual SONY ERICSSON J120I

[. . . ] J110 /J120 This is the Internet version of the User's guide. © Print only for private use. Contents Getting started . 71 Congratulations on your purchase of the Sony Ericsson J110 or J120. For additional phone content, go to www. sonyericsson. com/fun. [. . . ] To set the date 1 From standby select Menu } Settings } Time and date } Date. 2 Enter the date and select Save. Language You can select the language for the phone menu. Most SIM cards automatically set the language used in the menu to the language of the country where you bought your SIM card. If this is not the case, the predefined language is English. To change the phone language 1 From standby select Menu } Settings } Language. 2 Select an option. Brightness You can adjust the brightness of the screen. To set the brightness 1 From standby select Menu } Settings } Advanced } Brightness. 39 This is the Internet version of the User's guide. © Print only for private use. Locks Automatic keylock Automatic keylock in standby means the keypad is locked a short while after you last press a key. To turn the automatic keylock on 1 From standby select Menu } Settings } Advanced } Auto keylock. 2 Select On. SIM card lock The SIM card lock protects your subscription, but not your phone itself, from unauthorized use. If you change SIM cards, the phone still works with the new SIM card. Most SIM cards are locked at the time of purchase. If the SIM card lock is on, you have to enter a PIN (Personal Identity Number) every time you turn on your phone. If you enter your PIN incorrectly three times in a row, the SIM card is blocked. This is indicated by the message PIN blocked. To unblock it, you need to enter your PUK (Personal Unblocking Key). Your PIN and PUK are supplied by your network operator. You can edit your PIN and turn off your SIM card lock at any time. Attempts remaining: appears when you edit your PIN, you entered the PIN or PIN2 incorrectly. To unblock your SIM card 1 When PIN blocked. is displayed, enter your PUK and select OK. [. . . ] These are called defective pixels and occur when individual dots have malfunctioned and can not be adjusted. Two defective pixels are deemed acceptable. Minor variations in the appearance of the camera image may occur between phones. This is not uncommon in digital cameras and does not mean that the camera is defective in any way. [. . . ]