User manual SONY ERICSSON PC300 PC-CARD HSDPA-UMTS-EDGE

[. . . ] Wireless Manager 5 User Guide Contents Contents . Information Displayed in the Status Window . Displaying Wireless Manager Information . Windows status icons (Windows 2000 and Windows XP) . [. . . ] The Forward (Divert) calls panel is displayed on the right. Click Retrieve if you wish to check for existing settings. Make sure the Always checkbox is checked. Enter the new telephone number to which you want to forward calls. The Call divert settings applied successfully message informs you that the new setting has been sent to the mobile network. Radio Power Use this panel to manage the state of the radio transmitter. Option When Wireless Manager starts up: On application start-up and laptop resume where Wireless Manager was running at the time Windows was set to Standby or Hibernate Description You can select one of the following options to configure the radio status when Wireless Manager is started or when it resumes from being in stand-by: · Turn Radio On Select this option to automatically turn on the radio when Wireless Manager starts or resumes from stand-by. Turn Radio Off Select this option to automatically ensure that the radio is not turned on when Wireless Manager starts or resumes from stand-by. You may perform non-communication related activities such as Phonebook maintenance. You must first turn on the radio using the Enable button or menu before you can make a connection or send/receive SMS messages. This option is selected by default when you install Wireless Manager. Leave radio As Is If the radio is off, the Enable button is displayed. If the radio is already on (Wireless Manager exited with radio on and Leave radio As Is set or Enable radio all the time is set), then the radio will be left on when Wireless Manager starts. · · Wireless Manager ­ Settings Window 31 When Wireless Manager exits: You can select one of the following options to configure the radio status when Wireless Manager is closed: · Turn radio Off Select this option to turn off the radio when Wireless Manager is closed. Leave radio As Is Select this option to leave the radio in its current state when Wireless Manager closes. · Enable radio all the time You should normally leave this check box cleared. When enabled, the Windows driver turns the radio transmitter on when the card is inserted and leaves it enabled even when the card is not in use. You should check this option if your Windows logon requires you to log on using a dial-up connection; see Logging on to Windows using a Dial-up connection on page 54 for more details. When you click OK to activate this option, the following warning message is displayed: You have selected 'Enable radio all the time'. This is normally only required to support windows Log-on using dial-up connection. The radio will always be on, even when Wireless Manager is not running. When this option is selected, the Wireless Manager radio power start-up and shutdown options are disabled. Launch Buttons Launch buttons are extra buttons that you can add to the Wireless Manager toolbar. Typical uses are to enable your e-mail, web browser or VPN software quick and easy to start. You can also set these applications to start automatically when a connection is made. Launch Buttons To add a Launch Button 1. From the Wireless Manager window, select View 2. [. . . ] PCMCIA Personal Computer Memory Card International Association ­ defines specifications for PC Cards. A common format for the electronic distribution of documents. Phonebook Memory in the SIM card where phone numbers can be stored and accessed by name or position. QoS Quality of Service RADIUS Remote Access Dial-In Service. [. . . ]