User manual SONY AC-VQ1050D annexe 1

[. . . ] To reduce fire or shock hazard, do not expose the unit to rain or moisture. Remove the battery pack from the unit and then reinstall it. if the CHARGE lamp flashes again: Install a different "InfoLITHIUM" battery pack. If the CHARGE lamp lights up and does not flash again: If the CHARGE lamp goes out because the charging time has passed, there is no problem. [. . . ] ­ If the battery pack is removed from this unit after normal charge is finished but before full charge is finished. (It takes about one hour from when normal charge is complete to when full charge is complete. ) ­ When charging a battery pack that has not been use for a long time. To reduce fire or shock hazard, do not expose the unit to rain or moisture. Warranty for Recorded Content Contents of the recording cannot be compensated if recording or playback is not made due to a malfunction of the battery pack, AC Power Adaptor, AC Power Adaptor/Charger, etc. We cannot provide compensation for recorded content such as images and sound, if images are not recorded or played back due to a malfunction in the AC Adaptor/Charger, etc. AC-VQ1050B is not supplied with Connecting cord (DK-415) and Car battery cord (DCC-VQ1). Use a commercially available AC plug Adaptor (not supplied), if necessary, depending on the design of the wall outlet. This unit cannot be used to charge a Ni-Cd/Ni-MH type battery pack. Charge the battery pack on a flat surface without vibration. This symbol is intended to alert the user to the presence of uninsulated "Dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Charging becomes more difficult at lower temperatures. ⷠAlthough this unit enables quick charging, charging outside the recommended temperature range may lead to a longer charging time in order to protect the battery pack. Once the charging time has been extended, quick charging will not be restored even if the temperature is brought within the recommended temperature range. Do not connect this unit to a voltage Adaptor (travel converter) for overseas travel. This may result in overheating or other malfunction. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The Graphical Symbols with Supplemental Marking is located on the bottom of the unit. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Charging starts with the battery pack installed in Slot 1. Confirm the compatibility of your equipment before use. ⷠSome L series batteries may not have an L mark on the battery pack. Power immediately turns · fully charge again. [. . . ]