User manual SONY AC-VQH10

[. . . ] The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the set itself has been turned off. Remove the battery pack from the unit and then reinstall it. if the CHARGE lamp flashes again: Install a different "InfoLITHIUM" battery pack. If the CHARGE lamp lights up and does not flash again: If the CHARGE lamp goes out because the charging time has passed, there is no problem. [. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. The AC-VQH10 AC Adaptor/Charger can be used as follows: · Connection cords are included with this unit to operate Sony equipment (video camera, etc. The following functions are available when charging "InfoLITHIUM" battery packs. Being an "InfoLITHIUM" battery pack, it works with the following functions. If an "ActiFORCE" is used, an even higher control is possible. ­ Quick charging (Faster than charging with your video camera, etc. Cannot be used to recharge Ni-Cd or Ni-MH type batteries. ⷠCannot be used with some models of equipment (camcorder, etc. Confirm the compatibility of your equipment before use. Do not place the unit in a location where it is: ­ Extremely hot or cold Placing this unit in locations subject to the direct sunlight such as on dashboards or near heating apparatus may cause this unit to deform or malfunction. ­ Dusty or dirty In locations such as the seashore and other sandy areas or where dust clouds occur, protect the unit from sand and dust. ­ Very humid ­ Vibrating Charge the battery pack on a flat surface without vibration. ⷠDo not use the unit placed in a narrow space, such as between a wall and furniture. The battery terminal may be damaged if the battery pack is not attached correctly. ⷠDo not use this unit in a place with strong radio waves or radiation. May not be able to record or play back correctly. ⷠTo protect the battery pack, remove the battery pack from the unit as soon as the charging is completed. Keep the unit away from a TV or AM receivers. In particular, noise from the device may enter a TV or radio if it is placed nearby. ⷠUse this unit near to a wall outlet. This is to ensure that the power plug can be immediately unplugged from the wall outlet to turn the power off if some abnormality occurs during use. ⷠBe sure that nothing metallic comes into contact with the metal parts of the unit or connecting plate. [. . . ] This unit allows installation of two battery packs simultaneously. Charging starts with the battery pack installed in Slot 1. When two battery packs are installed but not simultaneously, charging starts with the battery pack installed first regardless of whether it is in Slot 1 or 2. Although charging can still be performed in these cases, quick charging is not performed in order to protect the battery pack. [. . . ]