User manual SONY AD-CM105

[. . . ] 10 FEATURES · Tracks from 10 CDs stored in the disc magazine can be selected and played. · Horizontal, vertical, slanted or suspended installation can be made. · Through the window at the top of the unit, you can see a disc spinning as it plays. [. . . ] To prevent these problems, if the burr is left on the disc, be sure to remove them with a ball-point pen, etc. as illustrated. Ball-point pen ENGLISH Burr · Do NOT touch the surface of the unlabeled side of the disc. · Do NOT attach paper or tape etc. to a disc. Burr Ball-point pen · Do NOT expose the discs to direct sunlight or excessive heat. · NEVER use solvents such as benzine or alcohol to clean a disc. · You cannot play an 8-cm (3-inch) CD -- even with the specially designed adaptor. · Do NOT use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in malfunction. Notes on the disc magazine · Do NOT leave the disc magazine in a place subject to excessive temperature or humidity. · Do NOT insert more than one disc per slot. · Do NOT drop the disc magazine. ENGLISH 2 UNPACKING Compact disc changer Compact disc magazine Connecting cable Supplied mounting kit for the compact disc changer The letters are keyed to those in the instructions. Use only the supplied mounting hardware for safe and secure installation. a Brackets (1 pair) b Washer screws (4 ea. ) c Plate brackets (2 ea. ) d Nuts (4 ea. ) e Adhesive label (1 sheet) 3 ENGLISH INSTALLATIONS Precautions Select the mounting location very carefully, referring to the following points. · Make sure that there is no fuel tank, wiring or piping on the other side of the mounting surface. · Make sure that the installation of the unit will not hinder the movement of the deck lid or interfere with the spare tire, etc. · Use only the supplied mounting kit for safe and proper installation. Mounting angle setting levers Be sure to change the position of both mounting angle setting levers according to the angle at which the unit is to be installed. Mounting angle setting levers Removing the transport screws Find the three transport screws at the bottom of the unit, which lock the unit's mechanism during transport. Remove these screws before installation. [. . . ] To save installation space, you can place the brackets a inside out, as illustrated below. 7 ENGLISH CONNECTIONS This unit is designed only for AIWA brand car stereo. Therefore you cannot use the unit with other brand's equipment. Compact disc changer Connecting cable (supplied) to AIWA brand car stereo Caution Be sure to disconnect the ground wire terminal of the car battery before making a connection in order to prevent short circuiting. Note Use only the supplied connecting cable. Using an unspecified connecting cable may cause background noise. ENGLISH 8 HOW TO USE How to use a compact disc magazine 1 With the label side up, insert a disc all the way. [. . . ]