User manual SONY AIR-SA20PK

[. . . ] 4-117-793-31(1) Wireless Audio System Operating Instructions AIR-SA20PK © 2008 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. [. . . ] There will be no stereo effect, but the reception will improve. GB 5 6 Press. ENTER. on. the. unit. store. other. stations. You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power supply cord or if a power failure occurs. Using an optional AV system You can enjoy audio and video of the connected iPod with an optional AV system. Operations 1 To call up a preset radio station using the main unit Press PRESET +/ repeatedly. To call up a preset radio station using the sub units 1 Preset. radio. stations. on. the. main. unit. (see. "Presetting. radio. stations". (page. Press S-AIR CH repeatedly until "TUNER" appears in the display. Press and hold S-AIR CH until "FM" changes to "AM" or vice versa. Connect. an. optional. AV. system. Start. playback. of. the. iPod. See "Listening to iPod music using the S-AIR connection" (page 23). 2 3 2 Select. the. tuner. channel. 3 Select. "FM". or. "AM. " Note The tuner's sound cannot be output through the iPod AUDIO OUT L/R jacks. Before enjoying video, adjust the video settings on the iPod to the appropriate settings according to your situation. 4 Press. PRESET. +/. repeatedly. to. select. a. preset. station. Tip To check the frequency of the station name Press DISPLAY on the remote for the main unit or DISPLAY on the sub unit while the station name is displayed. To return the station name indication, press DISPLAY while the frequency is displayed. The display on both the main unit and sub unit is switched if DISPLAY is pressed on either the main unit or sub unit. Even if you change the S-AIR mode or the S-AIR channel using PARTY CH, audio and/or video from the connected iPod will continue to be output from the iPod AUDIO L/R jacks and/or the iPod VIDEO OUT jack. GB Changing the display Using the main unit To view the information on the display Press DISPLAY on the remote. To turn off the display of the sub unit When the sub unit is turned off, the clock is displayed. You can turn off the clock display to minimize the amount of power consumed (Power Saving Mode). Press DISPLAY on the unit when the clock is displayed. Press the button again to display the clock. Note Regardless of the selected S-AIR mode, when the same S-AIR channel is selected on multiple sub units and you change the display of any one of them, the display on all sub units will change (only when the information of the connected main unit is displayed). Using the sub units To change the information on the display while the sub unit is on Press DISPLAY on the unit. Each time you press the button, the display changes as follows: When the sub unit is connected to the main unit: Information of the connected main unit1) Model name of the connected main unit2) Clock2) . . . When the sub unit is not connected to the main unit: "S-AIR" "UNLINKED"2) Clock2) . . . 1) 2) Depending on the iPod model you are using, up to 16 characters of the following information can be viewed, for example, while playing the iPod. Track name Artist name Album name Elapsed playing time of the track Characters that cannot be displayed appear as "_". When listening to the radio, the frequency or the station name is displayed. Displayed for about 8 seconds. GB Using the Timers The sub units offer two timer functions. If you use the Daily Timer with the Sleep Timer, the Sleep Timer has priority. Use buttons on the unit to set the timers. 4 Set. the. time. to. start. playing. Press / repeatedly to set the hour, and then press CLOCK/TIMER ENTER. Use the procedure above to set the minute. Sleep Timer: 5 6 You can fall asleep to music. [. . . ] UNLINKED* : The connection with the main unit is cut off. * Displayed on the sub units only. Precautions Notes on use of the S-AIR product As the S-AIR product transmits sound by radio waves, sound may skip when radio waves are obstructed. This is a characteristic of radio waves and is not a malfunction. As the S-AIR product transmits sound by radio waves, equipment that generates electromagnetic energy, such as a microwave oven, may interfere with sound transmission. As the S-AIR product uses the radio waves that share the same frequency as other wireless systems, such as wireless LAN or Bluetooth devices, interference or poor transmission may result. [. . . ]