User manual SONY ALT-SA31IR QUICK SETUP GUIDE

[. . . ] Graffiti, HotSync, and Palm OS are registered trademarks, and the HotSync logo and Palm are trademarks of Palm, Inc. Adobe and Adobe Acrobat Reader are trademarks of Adobe Systems Incorporated. This product includes fonts owned by TypeBank Co. , Ltd. All other trademarks are trademarks of their respective owners. CAUTION Please contact your nearest Sony dealer regarding the problem you are experiencing with your Sony product. 2 Table of contents What you can do with the CLIÉ Remote Commander . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] All other trademarks are trademarks of their respective owners. CAUTION Please contact your nearest Sony dealer regarding the problem you are experiencing with your Sony product. 2 Table of contents What you can do with the CLIÉ Remote Commander . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Preparing the CLIÉ Remote Commander for your use . . . . . . . . . . . . . . . . . . . . . 6 Assigning devices to the CLIÉ Remote Commander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Assigning operations to the application buttons and Jog Dial navigator . . . . . . . . . . . . . . 9 Using the CLIÉ handheld as a remote commander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Remote-controlling a device . . . . . . . . . . . . . . . . 11 Viewing the device name assigned to each quick-start button . . . . . . . . . . . . . . . . . . . . . . . . 12 CLIÉ Remote Commander menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tap OK. The remote control setting is assigned to the selected quick-start button, and the control screen for the assigned device appears. Chapter 4 Example of the VCR remotes 7 To assign more devices to the other quick-start buttons, tap Select on the control screen and repeat steps 2 to 5. Note Even if the manufacturer of the device is listed on the supported manufacturer list on page 14, some devices cannot be remote-controlled depending on its model or the year of its production. 7 Preparing the CLIÉ Remote Commander for your use Changing the remote control setting 1 2 Tap Menu on the control screen of the device of which you want to change the remote control settings. Tap Detail from the Options menu. The Detail screen appears. 3 4 Make changes as necessary and tap OK. The CLIÉ RMC dialog box appears. Chapter 4 Tap OK. The new remote control setting is set, and the control screen for the assigned device appears. Deleting a remote control setting Tap Delete in step 2 of "Changing the remote control setting" and tap OK. 8 Preparing the CLIÉ Remote Commander for your use Assigning operations to the application buttons and Jog Dial navigator You can assign operations to the Jog DialTM navigator or to the application buttons on the front panel. This is convenient for those operations you perform most (e. g. adjusting the TV volume), since you do not even have to take out the stylus to operate. 1 On the Application Launcher screen, rotate the Jog DialTM navigator to select CLIÉ RMC and then press the Jog Dial navigator. Or, tap the CLIÉ RMC icon on the Application Launcher screen. CLIÉ Remote Commander starts and the control screen of the last used device is displayed. 2 3 Tap Menu . Chapter 4 Tap Key Assignment from the Options menu. The Key Assignment screen appears. 4 If the check box for Use Key Assignment at the bottom right corner is not selected, tap to select it. If the check box is unmarked, application buttons and Jog Dial navigator cannot be used in the CLIÉ Remote Commander application even if operations are assigned to them. Continued on next page 9 Preparing the CLIÉ Remote Commander for your use 5 Tap the box next to each assignable button (e. g. JOG Up). The Key Assignment dialog box for each button appears. 6 7 8 9 Tap the arrow V next to Entry, and select the name of the remote control setting you wish to assign to the key. Tap the arrow V next to Function, and select the operation you want to assign to that button. Repeat steps 3 to 8 until you have finished setting all the functions that you want. Chapter 4 10 Using the CLIÉ handheld as a remote commander You can operate a remote-controlled device on the device's control screen. For those operations you have assigned to the Jog DialTM navigator or to the application buttons, see page 9. Notes · Be sure to point the IR port of your CLIÉ handheld toward the device that you wish to remote-control. · The reach of the remote-control signal is approximately 5 meters, but it may vary depending on the receiving device or on the environment. Remote-controlling a device Operating a device from the control screen 1 On the Application Launcher screen, rotate the Jog DialTM navigator to select CLIÉ RMC and press the Jog Dial navigator. [. . . ] For those operations you have assigned to the Jog DialTM navigator or to the application buttons, see page 9. Notes · Be sure to point the IR port of your CLIÉ handheld toward the device that you wish to remote-control. · The reach of the remote-control signal is approximately 5 meters, but it may vary depending on the receiving device or on the environment. Remote-controlling a device Operating a device from the control screen 1 On the Application Launcher screen, rotate the Jog DialTM navigator to select CLIÉ RMC and press the Jog Dial navigator. Or, tap the CLIÉ RMC icon on the Application Launcher screen. CLIÉ Remote Commander application starts and control screen for the last used device appears. Note If the setting for the last used device has been deleted, the Select Control screen appears. Chapter 4 2 Perform either of the following to switch to the control screen of the device you are about to remote-control. · For devices assigned to a quick-start button: Tap the quick-start button to which it is assigned. · For devices unassigned to a quick-start button: Tap Select, then tap to select the name of the remote control setting from the list. [. . . ]