User manual SONY ALT-SA32PC DATASHEET

[. . . ] Before using this software, please read the Software License Agreement that is supplied with the Sony CLIE handheld. Copying any or all of the contents of this software, sample images, and Operating Manual, or renting the software are prohibited by copyright laws. The Company is not liable for damage or loss resulting from the use of this software, or for any claim from a third party. The Company assumes no responsibility aside from the replacement of the media due to manufacturing fault. This software must not be used in a system other than that specified. [. . . ] When you copy the data to use this application by using the MS Gate application, be careful to select the location you copy the data to. - 6 Setting Auto-run for an Application To start an application automatically when inserting the Memory Stick media, set the following procedures. This example describes the setting to automatically start the PictureGear Pocket application when inserting the Memory Stick media containing image files into the CLIE handheld. 1 Install the application (PictureGear Pocket). To install the application, see the Operating Instructions for the CLIE handheld. Note The PictureGear Pocket application is preinstalled in some series of the CLIE handheld. For more information, refer to the Operating Instructions of the CLIE handheld. 2 3 Insert the Memory Stick media. Rotate the Jog Dial navigator on the Home screen or tap the MSAutorun icon to select the MSAutorun icon, and then press the Jog Dial navigator. MSAutorun starts up. 4 5 6 7 8 Press the Jog Dial navigator. A list of applications stored in the CLIE handheld is displayed. From the list of applications displayed in the CLIE handheld, tap the application PictureGear Pocket for auto-run setting. Tap Set. The setting is stored in the Memory Stick media. Tap OK. The auto-run setting for PictureGear Pocket is completed. Tap . 7 9 Remove the Memory Stick media. Try the setting on page 7. Display the Home screen on the CLIE handheld, and then insert the Memory Stick media to automatically start the PictureGear Pocket application. Remove the Memory Stick media to quit and return to the Home screen (page 15). Note When V Internal is displayed on the PictureGear Pocket screen, the image files in the CLIE handheld are displayed. To set to display the images in the Memory Stick media, tap V MS. Auto-run for the application in the Memory Stick media To automatically start the application in the Memory Stick media, set as follows. The example describes how to set gMovie . To prepare the desired movie on gMovie, see Add on application Guide manual. Note The gMovie application is preinstalled in some series of the CLIE handheld. In this case, install another application. 1 Install the gMovie application. To install the application, see the Operating Instructions manual for the CLIE handheld. 2 3 4 5 Insert the Memory Stick media. Tap gMovie from the displayed CLIE handheld side list. The example describes the setting for gMovie and its sample data files. Note The gMovie application is preinstalled in some series of the CLIE handheld. In this case, install another application. 1 2 3 4 5 Install the gMovie application into the CLIE handheld. Insert the Memory Stick media for auto-run setting into the Memory Stick Slot. Tap MOVE. The specified data files are copied into the Memory Stick media to be deleted from the CLIE handheld memory. Make sure you are in the folder \PALM\LAUNCHER. 6 7 8 Return to the Home screen to start MS Autorun. The list of applications in the Memory Stick media appears. Tap gMovie from the list displayed. Tap the Select launch app drop-down list and then tap "Select install DBs". The list of applications and database files appear. 13 9 10 Tap the movie data file of gMedia from the list displayed. Tap each item to select multiple database files. Tap Set. The setting is stored in the Memory Stick media, and then the Autorun setting display appears. 11 Tap OK. The setting to start the example in the CLIE handheld automatically displays the specified database files. Afterwards, return to the Home screen to remove the Memory Stick media. 14 Performing an Auto-run Function 1 Insert the Memory Stick media set for auto-run into the Memory Stick slot. The Now Loading dialog box appears, and the specified application and database files will be copied to the CLIE handheld. Insert the Memory Stick media into the Memory Stick slot. Tap the menu icon. Tap Tools. The Tools dialog box appears. Tap Delete autorun setting. The Delete setting dialog box appears. Tap OK. The auto-run setting is deleted. Tap close. zWhere to store the auto-run setting The auto-run setting of MS Autorun is stored in the file named "\PALM\DEFAULT. ARN" in the Memory Stick media. You can delete auto-run settings by deleting this file using your computer. 18 Supplemental Information Menu Commands Options menu The Options menu is displayed by tapping the menu Autorun is running. icon when MS Display log When Memory Stick media is inserted into or removed from your CLIE handheld, a history log is created. From the Options menu, you can view this information by tapping Display log. [. . . ] There is not enough free memory on your CLIE handheld. t The free memory required to run the auto-run function must be 1. 1 times the size of the application. The Memory Stick media is not working properly. t Your Memory Stick media may be damaged and should be discarded. [. . . ]