User manual SONY AZRS128

[. . . ] 4-254-568-12(1) The player Portable USB Memory Player with FM Radio Operating Instructions AZ-RS1/RS128/RS256 ©2004 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table cloths, curtains, etc. And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] (DOWN) or > (UP) for about one second. The player starts scanning the frequencies and stops when it finds a receivable station. (DOWN) or > (UP) repeatedly, the frequency changes step by step. 2 To turn off the radio Turn off the power by holding down Nx/ POWER until "SEE YOU" appears in the display. If you press Nx/POWER, music data will be played from the position where the playback was last stopped. 16 To enhance detection of receivable stations If there are stations that you want preset but cannot do it automatically because their signals are not strong enough, change the setting of "AUTO STOP LEVEL" to "HIGH" in order to enhance detection of receivable stations. (DOWN) or > (UP) repeatedly to select "AUTO STOP LEVEL. " 3 Press MENU. (DOWN) or > (UP) to select "HIGH*. " In case the same station is preset on two or more preset numbers because its signal is too strong, set the "AUTO STOP LEVEL" to "LOW. " 5 Press MENU. * The default setting at the time of purchase is "MID. " Presetting radio stations You can preset up to 20 FM radio stations, 10 stations each for FM 1 and FM 2. To preset stations automatically (Auto preset) 1 2 3 Perform steps 1 and 2 of "Listening to the radio" (page 16) to select the band. " and the preset numbers appear " in the display. Press and hold PRESET for more than 2 seconds. " " starts flashing, and the player starts scanning for stations from the lower frequencies. Using the radio Note Changing the setting of "AUTO STOP LEVEL" does not change the reception sensitivity. To improve the reception The headphone cord functions as the FM antenna. Extend the cord to improve the reception. The first received station is preset on the preset number 1, and then the player starts scanning for the next receivable station. PRES ET MENU TU NER If you press Nx/POWER or TUNER during auto presetting, the player stops scanning and exits the auto preset mode, and music data playback starts or the radio is switched to the other band. (Continued) 17 To preset a station manually (Manual preset) If there is a station that cannot be preset automatically, you can preset it manually by the following procedure. Before starting, you must exit the auto preset mode (" " and the preset numbers should not be displayed). 1 Press TUNER repeatedly to select "FM 1" or "FM 2. " 2 Tune in the station you want to preset. 3 Press and hold PRESET for more than 2 seconds. " " and the preset numbers flash in the display. or > repeatedly to select the preset number you want to store the station on. The selected preset number starts flashing. 5 Within 10 seconds, press PRESET. To tune in a preset station 1 2 3 Press TUNER repeatedly to select "FM 1" or "FM 2. " Press PRESET to display the preset numbers. or > repeatedly to select the preset number of the station you want to tune in. To clear all preset stations Turn off the power, remove the "pavit" from the player, and press and hold Nx/POWER for more than 10 seconds. The preset stations return to those at the time of purchase. 18 B Available features Using the stopwatch You can use the player as a stopwatch. The stopwatch has a lap time feature enabling you to calculate a gap from a previous stored time. You can use the stopwatch both while playing music data and listening to the radio. To display the lap time Press PRESET at the point you need to check the lap time. [. . . ] (Continued) The buttons do not work. The display becomes hard to see or nothing is displayed. Additional information The volume will not increase. There is no sound output from the right headphone. Erroneous display. The "pavit" insertion indicator becomes " ". 25 Battery Symptom Battery life is short. Cause/Remedy c The operating temperature is below 0°C (32°F). [. . . ]