User manual SONY BCR-RU1/C

[. . . ] Checking the package contents and other components This cradle is designed for use only with SONY Reader PRS-500. For details on PRS-500, refer to its Operation Guide. Checking the package contents · Charging cradle (1) · Attachment (1) Pre-installed in the cradle when you purchase this product. [. . . ] · Keep the unit away from TV or AM receivers, as it may disturb reception. Guide to parts Multi connector To connect Sony Reader to the cradle. Cleaning Clean the unit with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish. DC IN jack To connect the AC power adapter (supplied with Sony Reader). USB connector To connect the USB cable (supplied with Sony Reader). On "LIMITED WARRANTY" card · The unit comes with a "LIMITED WARRANTY" card, which should be obtained from the store when you purchase the unit. · Fill out the prescribed items, check the contents and keep in a safe place. · Warranty period is 1 year from date of purchase. Sony guarantees repair/replacement of this product, as described in the "LIMITED WARRANTY" card within the warranty period. For details, refer to the "LIMITED WARRANTY" card. Charge indicator Lights up in white while charging, and goes off when charging is complete. Note on installation If you use the unit at a place subject to static or electrical noise, the file's transferring information may be corrupted. This would prevent successful transferring authorization on your computer. Continued overleaf Charging Sony Reader and transferring contents with your computer connected Sony logo on soft cover (on the rear of Sony Reader) Placing Sony Reader with its soft cover removed When you place Sony Reader with its soft cover removed, use the attachment in the cradle. To AC outlet To USB POWER Switch To USB To DC IN jack Connect the cradle to an AC outlet. Place Sony Reader squarely in the cradle. The Charge indicator of the cradle lights up in white while charging, and goes off when charging is complete. Removing Sony Reader Holding the cradle, pull Sony Reader squarely up in the direction of the arrow. Charging Sony Reader Sony logo on soft cover (on the rear of Sony Reader) Sony logo on soft cover (on the rear of Sony Reader) To AC outlet To DC IN jack Specifications Terminal 5. 2V DC-in USB mini-B Connect the cradle to an AC outlet. Place Sony Reader squarely in the cradle. [. . . ] · When Sony Reader is placed in the cradle with its battery fully charged, the Charge indicator goes off after a few seconds. · If the hand strap is attached to Sony Reader, set it to the side of the cradle (as illustrated). · Placing Sony Reader on the cradle may not be possible if the hand strap end is thick. [. . . ]