User manual SONY BDP-BX18

[. . . ] The shielded Interface cable (Network cable) must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. Owner's Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. BDP-BX188 Serial No. ______________ For customers in the U. S. A If this product is not working properly, please call 1-800-2227669. [. . . ] Select the settings you want to reset to default, and press ENTER. The display asks for confirmation. You can reset the following settings: ­ Video Settings ­ Audio Settings ­ BD/DVD Viewing Settings ­ Photo Settings ­ System Settings ­ Network Settings ­ All Settings Settings and Adjustments 4 b Select "Start" using </, , and press ENTER. When "All Settings" is selected in step 3, the Bluray Disc indicator lights up, then turns off when Easy Setup is complete. 53 Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power does not turn on. , Check that the AC power cord is connected securely. , It takes a short while before the player turns on. The message "A new software version has been found on the network. " appears on the screen when turning the player on. , See "Network Update" (page 41) to update the player to a newer software version. Additional Information Disc The disc does not play. , The disc is dirty. Insert the disc with the playback side facing down. , You are attempting to play a disc with a format that cannot be played back by this player (page 60). , The region code on the BD or DVD does not match the player. , The player cannot play a recorded disc that is not correctly finalized (page 60). Picture See also "Connecting to an HDMI jack" (page 15) when connecting equipment using the HDMI cable. There is no picture/picture noise appears. , Check that all the connecting cables are securely connected. , Check whether the connecting cables are damaged. 54 , Check the connection to your TV (page 14) and switch the input selector on your TV so that the signal from the player appears on the TV screen. , When playing a double-layer DVD, the video and audio may be momentarily interrupted at the point where the layers switch. Sound See also "Connecting to an HDMI jack" (page 20) when connecting equipment using the HDMI cable. There is no sound. , Check that all the connecting cables are securely connected. , Check whether the connecting cables are damaged. , Set "Control for HDMI" to "On" (page 50). A message indicating that the local storage does not have enough space appears on the screen. , Delete unnecessary data in the external memory (page 34). 56 Operation The remote does not function. , The batteries in the remote are weak (page 26). , The distance between the remote and the player is too far. , The remote is not pointed at the remote sensor on the player. The disc tray does not open and you cannot remove the disc even after you press A. , Try the following: 1Turn the player off, and disconnect the AC power cord. 2Reconnect the AC power cord while pressing down A on the player. 3Keep pressing down A on the player until the tray opens. 5When "WAIT" appears in the front panel display, hold down [/1 on the player for more than 10 seconds until the player turns on again. The file name is not correctly displayed. , The player can only display ISO 8859-1compliant character formats. Other character formats may be displayed differently. , Depending on the writing software used, the input characters may be displayed differently. The player does not respond to any button. , Moisture has condensed inside the player (page 3). , Hold down [/1 on the player for more than 10 seconds until the indicators in the front panel display turn off. If the player still does not respond to any button, disconnect then reconnect the AC power cord. Additional Information The disc does not start playing from the beginning. , Resume Play is on (page 32). Some functions such as Stop or Search cannot be performed. , Depending on the disc, you may not be able to do some of the operations above. [. . . ] If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. This notice may not be removed or altered from any source distribution. Notice about PuTTY Software This product contains some code of the application PuTTY. Source package: putty-0. 58. tar. gz License text: http://www. chiark. greenend. org. uk/~sgtatham/ putty/licence. html PuTTY is copyright 1997-2006 Simon Tatham. [. . . ]