User manual SONY BDP-BX59

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. [. . . ] 16:9 ­ Wide-screen TV, or a TV with a wide mode function. 4:3 Video Out ­ Select the display configuration for a 4:3 screen picture on a 16:9 wide screen TV. Full ­ Displays a 4:3 screen picture in 16:9 aspect ratio. Normal ­ Displays a 4:3 screen picture in 4:3 aspect ratio with black bands on the sides. Select this if your TV does not have a 4:3 screen mode. DVD Aspect Ratio Letter Box ­ Displays a wide picture with black bands on the top and ­ Select the display configuration for a 16:9 DVD picture on a 4:3 screen TV (selectable bottom. when "TV Type" is set to "4:3"). Note that the aspect ratio is fixed on some Pan & Scan discs. For example, a 4:3 letterbox picture ­ Displays a full-height picture on the entire screen, with trimmed sides. may appear even when "Pan & Scan" is selected. Y, Cb, Cr ­ Select this when connecting to an HDMI device. RGB (16-235) ­ Select this when connecting to a device with an HDCP-compliant DVI jack. RGB (0-255) ­ Select this when connecting to an RGB (0-255) device. Changing the Initial Settings YCbCr / RGBPC (HDMI) ­ Select the type of output from the HDMI OUT jack. On ­ Sends 1920 × 1080p/24 Hz video signals when playing Film-based materials on BD­ For connection to a 1080/24p-compatible TV ROMs (720p/24 Hz or 1080p/24 Hz). Select this when the connection applies. Lt/Rt ­ Allows you to hear surround sound when the connected device has a built-in Dolby Pro Logic decoder. Outputs audio signals according to the status of the connected HDMI device. PCM ­ Converts all audio signals to Linear PCM. DTS Changing the Initial Settings DTS Downmix Audio (HDMI) ­ Select the output method from the HDMI OUT jack. , continued 47 About the audio output signals The audio output differs as follows, depending on the source, output jack, and the selected settings. Jacks/ settings Disc/source BDLinear PCM 2ch ROM AUDIO OUT L/R jacks*1 2ch 2ch 5. 1ch 2ch 5. 1ch 5. 1ch Downmix 5. 1ch 5. 1ch DIGITAL OUT (OPTICAL/ COAXIAL) jacks*2 PCM Bitstream 2ch LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch LPCM 2ch LPCM 2ch Downmix LPCM 2ch LPCM 2ch Downmix LPCM 2ch Downmix LPCM Dolby Digital Dolby Digital HDMI OUT jack*3 PCM*4 2ch LPCM 5. 1ch LPCM 7. 1ch LPCM 5. 1ch LPCM 7. 1ch LPCM (Dolby Digital Plus)*6 7. 1ch LPCM (Dolby TrueHD) *7 5. 1ch LPCM Auto*4 2ch LPCM 5. 1ch LPCM 7. 1ch LPCM Dolby Digital Dolby Digital Plus*8 Dolby TrueHD*8 DTS 5. 1ch*5 2ch Downmix 7. 1ch Dolby Digital Dolby Digital Plus 2ch Downmix 2ch Downmix 2ch Downmix Dolby TrueHD DTS DTS-HD High Resolution Audio DTS-HD Master Audio DVD Linear PCM Dolby Digital DTS MPEG CD Linear PCM 2ch DTS 2ch Downmix 2ch Downmix 5. 1ch 5. 1ch Dolby Digital DTS 2ch Downmix 5. 1ch DTS 7. 1ch LPCM DTS-HD High (DTS-HD High Resolution Resolution Audio*8 9 Audio) * 5. 1ch LPCM 2ch LPCM 5. 1ch LPCM 5. 1ch LPCM 2ch LPCM 2ch LPCM 5. 1ch LPCM DTS 2ch LPCM Dolby Digital DTS 2ch LPCM 2ch LPCM DTS 2ch Downmix 2ch 2ch Downmix 2ch Downmix 2ch 2ch 2ch Downmix 5. 1ch 2ch 5. 1ch 5. 1ch 2ch 2ch 5. 1ch DTS 2ch LPCM Dolby Digital DTS -- 2ch LPCM DTS *1 "2 Channel" and "5. 1 Channel" are selectable under "Audio Output Mode" in "Speakers" Setup (page 51). *2 PCM : when "Dolby Digital" or "DTS" in "Audio Setup" is set to "Downmix PCM" (page 47). Bitstream : when "Dolby Digital" or "DTS" in "Audio Setup" is set to "Dolby Digital" or "DTS" (page 47). *3 Selectable under "Audio (HDMI)" in "Audio Setup" (page 47). *4 Selectable under "Audio (HDMI)" in "Audio Setup" (page 47). Resulting output may differ depending on the connected HDMI device. *5 When the sampling frequency is 192 kHz, the player downmixes to 2ch signals even if the disc or source is 5. 1ch. *6 Outputs 7. 1ch LPCM signals decoded from Dolby Digital Plus audio stream. [. . . ] The MPEG 2 format is adopted for the efficient video data compression. The variable rate coding technology that changes the data to be allocated according to the status of the picture is adopted for reproducing high-quality pictures. Audio information is recorded in a multi-channel format, such as Dolby Digital, allowing for a realistic audio presence. BD-J application The BD-ROM format supports Java for interactive functions. "BD-J" offers content providers almost unlimited functionality when creating interactive BD-ROM titles. Dolby Digital Plus (page 48) Developed as an extension to Dolby Digital, the audio coding technology supports 7. 1 multi-channel surround sound. BD-R (page 5) BD-R (Blu-ray Disc Recordable) is a recordable, write-once Blu-ray Disc, available in the same capacities as the BD below. [. . . ]