User manual SONY BDV-E770W

[. . . ] 4-178-242-11(1) The software of this system may be updated in the future. To find out details on any available updates, please visit: http://www. sony. com/bluraysupport/ Blu-ray Disc/DVD Home Theatre System Operating Instructions BDV-E770W / T77 © 2010 Sony Corporation Printed in Malaysia (1) WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. [. . . ] The system adjusts the speaker settings automatically. Be quiet during the measurement. Note Setting the Speakers [Speaker Settings] To obtain the best possible surround sound, set connection of the speakers and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level. · Before [Auto Calibration], make sure that the surround amplifier turns on and you install the surround amplifier in the appropriate location. If you install the surround amplifier in an improper location, such as another room, proper measurement will not be obtained. · When you use the Wireless Surround Speaker Kit (WAHT-SBP2, optional) for the surround back speakers (page 15), install the speakers in appropriate location and turn the surround amplifier on. To use the surround back speakers, set [Surround Back] in [Speaker Settings] to [Yes] (page 46) 1 2 3 4 5 Press HOME. The home menu appears on the TV screen. Press C/c to select [Setup]. Press X/x to select [Audio Settings], then press . Press X/x to select [Speaker Settings], then press . 8 Confirm the conclusions of [Auto Calibration]. The [Speaker Settings] display appears. Press X/x to select the item, then press . The speakers connected to the unit are listed as [Yes] on the TV screen. Note Check the following settings. x [Connection] · If measurement fails, follow the message then retry [Auto Calibration]. · The measurement for [Subwoofer] is always [Yes] and [Speaker Settings] returns to the default setting when you perform [Auto Calibration]. 9 Press X/x to select [OK] or [Cancel], then press . x The measurement is OK. Disconnect the calibration mic, then select [OK]. The result is implemented. x The measurement is not OK. If you do not connect center or surround speakers, set the parameters for [Center] and [Surround]. Since the front speaker and subwoofer settings are fixed, you cannot change them. When you use the Wireless Surround Speaker Kit (WAHT-SBP2, optional) for the surround back speakers (page 15), set [Surround Back] also. [Front] [Yes] [Center] Follow the message, then select [OK] to retry. Note [Yes]: Normally select this. [None]: Select this if no center speaker is used. [Surround] · While the Auto Calibration function works: ­ do not turn off the power. ­ do not disconnect the calibration mic. [Yes]: Normally select this. [None]: Select this if no surround speaker is used. [Surround Back] [Yes]: Select this if surround back speakers are used. [None]: Select this if no surround back speakers is used. 46US [Subwoofer] Tip [Yes] x [Distance] · You can change measurement units (feet or meters) by pressing the color button (RED). When you move the speakers, be sure to set the parameters of the distance (A) from the listening position to the speakers. You can set the parameters from 0 to 23 feet (0. 0 to 7. 0 meters). The speakers in the illustration correspond to the following: 1Center speaker 2Front left speaker (L) 3Front right speaker (R) 4Subwoofer 5Surround left speaker (L) 6Surround right speaker (R) 7Surround back left speaker (L) (optional) 8Surround back right speaker (R) (optional) x [Level] You can adjust the sound level of the speakers. You can set the parameters from ­6. 0 dB to +6. 0 dB. Be sure to set [Test Tone] to [On] for easy adjustment. [Front Left/Right] 0. 0 dB: Set the front speaker level. [Center]* 0. 0 dB: Set the center speaker level. [. . . ] The result is enhanced sound field directionality that approaches the quality of discrete 5. 1-channel sound. Dolby Surround Pro Logic As one method of decoding Dolby Surround, Dolby Surround Pro Logic produces four channels from 2 channel sound. Compared with the former Dolby Surround system, Dolby Surround Pro Logic reproduces left-to-right panning more naturally and localizes sounds more precisely. To take full advantage of Dolby Surround Pro Logic, you should have one pair of surround speakers and a center speaker. The surround speakers output monaural sound. Dolby TrueHD HDMI is an interface that supports both video and audio on a single digital connection, allowing you to enjoy high quality digital picture and sound. [. . . ]