User manual SONY BDV-IS1000

[. . . ] 4-109-708-31(1) BD/DVD Home Theatre System Operating Instructions BDV-IT1000/BDV-IS1000 (1) © 2008 Sony Corporation Sony Corporation Printed in Malaysia WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] ­ S-AIR ID A: equivalent channel for Wi-Fi channel 1 ­ S-AIR ID B: equivalent channel for Wi-Fi channel 6 ­ S-AIR ID C: equivalent channel for Wi-Fi channel 11 · The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s). 1 2 3 4 5 Press HOME. The home menu appears on the TV screen. Press C/c to select [Setup]. Press X/x to select [System Settings], then press . Press X/x to select [S-AIR RF Change], then press . Press X/x to select the desired setting. · [Auto]: Normally select this. The system changes the setting to [On] or [Off] automatically. · [On]: The system transmits sound by searching the better channel for transmitting. · [Off]: The system transmits sound by fixing the channel for transmitting. 6 7 Press . The setting is made. When you set to [Off], select the ID so that sound transmission is most stable (page 99). 104GB Note Other Operations Using the Control for HDMI Function for "BRAVIA" Sync This function is available on TVs with the "BRAVIA" Sync function only. By connecting Sony components that are compatible with the Control for HDMI function with an HDMI cable (not supplied), operation is simplified as below: ­ Theatre Mode (page 106) ­ One-Touch Play (page 106) ­ System Power Off (page 107) ­ Volume Limit (page 107) ­ System Audio Control (page 107) ­ Language Follow (page 107) Control for HDMI is a mutual control function standard used by CEC (Consumer Electronics Control) for HDMI (High-Definition Multimedia Interface). The Control for HDMI function will not work in the following cases: ­ When you connect this system to a component which is not compatible with the Control for HDMI function. ­ A component does not have an HDMI jack. There are convenient buttons on the system's remote for operating the TV, such as THEATRE, ONE-TOUCH PLAY, AV "/1. For details, see "Controlling the TV or Other Components with the Supplied Remote" (page 111) and refer to the operating instructions of the TV. THEATRE ONE-TOUCH PLAY · Depending on the connected component, the Control for HDMI function may not work. Refer to the operating instructions supplied with the component. · The Control for HDMI function may not work if you connect a component other than Sony, even if the component is compatible with the Control for HDMI function. Preparing for the Control for HDMI function (Control for HDMI - Easy Setting) The system is compatible with the Control for HDMI - Easy Setting function. If the TV is compatible with the Control for HDMI - Easy Setting function, you can set the system's [Control for HDMI] function automatically by setting the TV. For details, refer to the operating instructions of the TV. If the TV is not compatible with the Control for HDMI - Easy Setting function, set the Control for HDMI function of the system and TV manually. Note Other Operations · Displayed items vary depending on the country model. 1 Make sure that the system is connected to the TV and the connected components (which should be compatible with the Control for HDMI function) using HDMI cables. Turn on the TV and press [/1 to turn on the system. Switch the input selector on your TV so that the signal from the system through the HDMI input appears on the TV screen. Set the Control for HDMI function of the system and TV. 2 3 4 AV BRAVIA Sync STB TV BD OPERATION CHANGE 1 1 2 2 3 3 The Control for HDMI function for the system and the connected component is simultaneously set to on. During the setting, "SCANNING" appears in the front panel display. After you finish the setting, "COMPLETE" appears in the front panel display. [. . . ] Furthermore, since all the signals are processed digitally, less signal degradation occurs. 153GB Dolby Digital Plus Developed as an extension to Dolby Digital, the audio coding technology supports 7. 1 multichannel surround sound. Dolby Pro Logic II being recorded discretely and processed in digitally. DTS-HD High Resolution Audio Dolby Pro Logic II creates five full-bandwidth output channels from 2 channel sources. This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. x Movie mode Developed as an extension to DTS Digital Surround format. It supports a maximum sampling frequency of 96 kHz, and 7. 1 multichannel surround. DTS-HD High Resolution Audio has a maximum transmission rate of 6 Mbps, with lossy compression (Lossy). DTS-HD Master Audio The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. [. . . ]