User manual SONY BDV-T79

[. . . ] Attn: Business Information Center (BIC) 12451 Gateway Boulevard Ft. Myers, Florida 33913 Telephone No. : 800-686-7669 The number below is for FCC related matters only. Declaration of Conformity Trade Name: SONY Model No. : Q004-R1 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell NJ 07649 U. S. A. [. . . ] · Set a progressive component signals (e. g. DVD) to "Component" and 15k RGB signals (e. g. game machines) to "Video GBR. " Color System Selects the color system of the input signal. Power Saving When set to "On, " the projector goes into power saving mode if no signal is input for 10 minutes. This mode is cancelled when a signal is input or any button is pressed. Auto: One of the following signals is selected automatically: "NTSC, " "PAL, " "SECAM, " "NTSC 4. 43, " "PAL-M, " "PAL-N. " NTSC3. 58, PAL, SECAM, NTSC4. 43, PAL-M, PAL-N: Set the color system to a selected input signal. Normally, set to "Auto. " If the picture is distorted or colorless, select the color system appropriate for the input signal. Illumination When set to "On, " the projector turns on the illumination on the top panel of the projector. It turns off when this item is set to "Off. " Information Panel When set to "On, " information appears on the information panel display. This information disappears when this item is set to "Off. " Source Direct When set to "On, " the projector reproduces a faithful picture from the following HD (High Definition) input signals: input signal preset memory No. 5, 45, 49. Color Space Selects the range of color reproduction from "Normal" or "Wide. " 46 47 MENU SETTING menu INSTALL SETTING menu The MENU SETTING menu is used for changing the on-screen menu settings of the projector. Status (on-screen display) When set to "Off, " the on-screen display is turned off except for the menus, messages displayed when the power is turned off, and warning messages. The INSTALL SETTING menu is used for changing the installation settings of the projector. V Keystone Corrects the vertical trapezoidal distortion of the picture. Set a lower value (the ­ direction) when the bottom of the trapezoid is longer than the top. Set a higher value (the + direction) when the top of the trapezoid is longer than the bottom. Language Selects the language used in the menu and in on-screen displays. Available languages are: "English, " "Dutch, " "French, " "Italian, " "German, " "Spanish, " "Portuguese, " "Russian, " "Swedish, " "Norwegian, " "Japanese, " "Chinese, " and "Korean. " Note · You cannot adjust "V Keystone" when input signal preset memory No. 5, 45, or 49 is input and "Source Direct" is set to "On. " Image Flip Reverses the picture horizontally or vertically. Adjustments and Settings Using the Menu Menu Position Selects the display position of the menus from "Top Left, " "Bottom Left, " "Center, " "Top Right, " or "Bottom Right. " Off: The picture is not reversed. Proceed with installation following the messages displayed in the setup dialog box. Notes · During installation, an electronic "End-user License Agreement" is displayed. It is important that you read the agreement first. Only after you agree with the agreement you can install ImageDirector. · If you already have a version of ImageDirector installed, quit the existing ImageDirector and uninstall it before you update your ImageDirector. Install the latest ImageDirector only after you have uninstalled the previous ImageDirector. Adjustments and Settings Using the Menu continued 52 53 ImageDirector (continued) Uninstalling ImageDirector Uninstall ImageDirector as follows. Note · To uninstall the ImageDirector application installed on your computer, first close ImageDirector. For Windows XP Home Edition/ Professional 1 Click [Start] on the taskbar. 2 Click [Control Panel] on the [Start] menu. The "Control Panel" window appears. The "Add/Remove Programs" dialog box appears. 4 Select "ImageDirector2" from the list, then click [Change/Remove]. Follow the instructions on the screen. For Windows 98/98SE/ 2000 Professional/Me 1 Click [Start] on the taskbar. 2 Point to [Settings] on the [Start] menu. [. . . ] 50 Throwing distance . . . . . . . . . . . . . . . . . . . . . . 63 Title Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Input signal preset memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 51 Installation . . . . . . . . . . . . . . . . . . . . . 56, 58, 60 INSTALL SETTING menu . . . . . . . . . . [. . . ]