User manual SONY BKM-10R

[. . . ] Die Erfüllung dieser Direktive bedeutet Konformität für die folgenden Europäischen Normen: · EN55103-1: Elektromagnetische Interferenz (Emission) · EN55103-2: Elektromagnetische Empfindlichkeit (Immunität) Dieses Produkt ist für den Einsatz unter folgenden elektromagnetischen Bedingungen ausgelegt: E1 (Wohnbereich), E2 (kommerzieller und in beschränktem Maße industrieller Bereich), E3 (Stadtbereich im Freien) und E4 (kontrollierter EMV-Bereich, z. B. Fernsehstudio). AVERTISSEMENT Afin d'éviter tout risque d'incendie ou d'électrocution, ne pas exposer cet appareil à la pluie ou à l'humidité. Afin d'écarter tout risque d'électrocution, garder le coffret fermé. Ne confier l'entretien de l'appareil qu'à un personnel qualifié. WARNUNG Um Feuergefahr und die Gefahr eines elektrischen SchIages zu vermeiden, darf das Gerät weder Regen noch Feuchtigkeit ausgesetzt werden. [. . . ] This makes it easy to put all monitors in your system into the same setup and adjustment state. Attach to 20-inch monitors You can use an optional BKM-32H Monitor Control Unit Attachment Kit to attach the BKM-10R to the BVM-20F1U/20F1E and other BVM-series color video monitors. Attach to 24-inch monitors You can use an optional BKM-34H Monitor Control Unit Attachment Kit to attach the BKM-10R to the BVM-D24E1WU/D24E1WE/D24E1WA color video monitor. Rack Mounting You can use an supplied rack mount attachment screws and an optional MB-510 Rack Mount Kit to mount the BKM-10R in an EIA standard 19-inch rack. 2(E) Location and Function of Parts 1 Monitor memory card insertion slot 5 POWER switch 6 DEGAUSS button 7 DISPLAY UNIT connector (rear) 2 SHIFT button 3 Function buttons 4 Menu operation buttons 8 Numeric keypad 9 MANUAL adjustment buttons and knobs 1 Monitor memory card insertion slot Insert an optional BKM-12Y Monitor Memory Card. 2 SHIFT button Each of the Function buttons 3 has a Shift On function as well as a Shift Off function. Press this button to select Shift On or Shift Off functions. Each time you press this button, its orange LED lights (Shift On) or goes out (Shift Off). Shift On: Use the function indicated below the Function button. Shift Off: Use the function indicated above the Function button. 3(E) BKM-10R Monitor Control Unit 3 Function buttons Use these buttons to control the operation of the monitor. Each of these buttons has a Shift On function, indicated below the button, as well as a Shift Off function, indicated above the button. Press the SHIFT button 2 to select the desired function. Shift Off functions (green LED) Each time you press one of these buttons, its LED lights or goes out and the function of the button selected with the SHIFT button 2 is turned on or off. The LED color change whether you select Shift Off functions or Shift On functions. For Shift Off functions: Green LED For Shift On functions: Orange LED (underscan): Turn the button on for underscanning. The display size is reduced by approximately 3%, so that the four corners of the raster are visible. (horizontal delay): Turn the button on to observe the horizontal sync near the left quarter of the screen. · Picture brightness is adjusted automatically for easy observation. · Press the button together with the vertical delay button to display a pulse cross. (vertical delay): Turn the button on to observe the vertical sync signal. The picture is shifted vertically and the vertical signal is displayed near the center of the screen. · Picture brightness is adjusted automatically for easy observation. · Press the button together with the horizontal delay button to display a pulse cross. MONO APT COMB F1 F2 ADDRESS MONO (monochrome): Turn the button on to display color pictures in monochrome. When the button is off, the monitor switches automatically between color and monochrome mode, depending on the presence or absence of color burst signal. 16 : 9 SYNC BLUE ONLY R G B F3 F4 SAFE AREA ADDRESS: Turn the button on to display the ADDRESS menu on the monitor screen. You can use the ADDRESS menu to set operating parameters for monitor groups. For details, refer to the monitor's operation manual. F1 and F2: These buttons are reserved for future use. [. . . ] EJECT switch: Move this switch under the " mark to eject the monitor memory card. MONITOR connector (D-sub 9-pin): Using the supplied cable, connect to the OPTION connector on the front of the monitor. 11(E) BKM-11R Monitor Control Unit Connection Connect the BKM-11R to the monitor as shown in the figure below. For automatic white balance adjustment, connect also a color analyzer. Monitor Ejecting the monitor memory card Note Do not eject the monitor memory card while data is being saved or loaded. OPTION connector MONITOR connector EJECT switch Monitor memory card Move the EJECT switch under the " mark to eject the monitor memory card. OPTION connector BKM-11R Specifications BVM-monitor connection cable (supplied) General Power requirements 5 V DC (supplied from the connected monitor) Power consumption 0. 5 W 0. 7 W max. Maximum dimensions (w/h/d) 90 × 40 × 230 mm (3 5/8 × 1 5/8 × 9 1/8 inches) Mass 520 g (1 lb 2 oz) Note It is necessary to upgrade the monitor software to version "Ver. 1. 2x or later". Inserting and Ejecting the Monitor Memory Card Proceed as follows to insert and remove an optional BKM-12Y Monitor Memory Card. For information about using a monitor memory card to save and load monitor data, refer to the operation manual for your monitor. Operating conditions Temperature 0°C to 35°C (32°F to 95°F) Optimum temperature 20°C to 30°C (68°F to 86°F) Humidity 0% to 90% (no condensation) Pressure 700 hPa to 1060 hPa Inserting the monitor memory card Storage and transport conditions Monitor memory card insertion slot Monitor memory card Temperature Humidity Pressure ­10°C to +40°C (14°F to 104°F) 0% to 90% 700 hPa to 1060 hPa Be careful not to let your hands touch the connectors on the front edge of the monitor memory card. Input/output connectors MONITOR OPTION D-sub 9-pin × 1 Mini-DIN 8-pin × 1 12(E) Accessories supplied BVM-monitor connection cable (1) Operation Manual (1) Accessories not supplied BKM-12Y Monitor Memory Card Related equipment BVM-20F1U/20E1U/20G1U/20F1E/20E1E/20G1E/ 20G1A/14F1U/14E1U/14G1U/14F1E/14E1E/ 14G1E/14G1A/14F5U/14E5U/14G5U/14F5E/ 14E5E/14G5E/14G5A Color Video Monitor BVM-D24E1WU/D24E1WE/D24E1WA/D20F1U/ D20F1E/D20F1A/D14H1U/D14H1E/D14H1A/ D14H5U/D14H5E/D14H5A/D9H1U/D9H1E/ D9H1A/D9H5U/D9H5E/D9H5A Color Video Monitor HDM-20E1U/14E1U/14E5U Color Video Monitor Design and specifications are subject to change without notice. 13(E) The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. [. . . ]