User manual SONY BKM-A-505

[. . . ] CONTROL PANEL (for MAV-555 MULTI ACCESS VIDEO DISK RECORDER) BKMA-505 (Ver. 2. 32) OPERATION MANUAL [English] 1st Edition (Revised 4) Serial No. 10001 and Higher For the customers in the USA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] Subtract from the selected portion of the time data currently being entered. Add to the selected portion of the time data currently being entered. Cancel the entry, and close the dialog box. Confirm the entry, and close the dialog box. SHIFT+L1 to L6 A to F 3-42 (E) Chapter 3 Operating Modes Entry in the time data entry dialog box In the time data entry dialog box, use the following principles to enter a numeric value. Entry method · Using the L keys as a numeric keypad, enter a value. · New digits are always added at the least significant position, and the previous value is shifted up by one digit. Once the value has reached eight digits, further entry causes the most significant digit to be lost. · Press B2 (Backspace) to delete the lowest digit, and shift the other digits down (digits which were lost from the most significant digit position because more than eight digits were entered are not restored). · While the time data entry dialog box is displayed, pressing the RESET key clears all digits to zero. Adding or subtracting from the time data When you press the B3 (Direct Cue Up) key in material mode, the B2 (Manual TC Entry) in edit mode, or the B6 (Direct Cue Up) key in Dual Play mode, you can add to or subtract from the time data. · Press the B3 (-) or B4 (+) key accordingly when you want to subtract from or add to the displayed time data. For example, if you want to subtract one second from the time data, press the B3 (-) key and enter "100". Confirming the entered time data value · To confirm the entered time data value, press B7 (OK). If there are high-end digits not entered, they are filled with zeros at this point. To cancel the entry, and return to the state before you opened the dialog box, instead of B7, press B6 (Cancel). · If an invalid value is input for the time data, the value reverts to that which was previously displayed and the dialog remains open. Chapter 3 Operating Modes 3-43 (E) 3-7 Dialog Box Operations 3-7-2 Text Entry Dialog Box The text entry dialog box appears when data is to be entered as a text string, such as a material name. Using the MULTI CONTROL knob, you enter a string by selecting characters one at a time from any of three character sets: capital letters, lowercase letters, and symbols. Text entry dialog box display and key assignments Example text entry dialog box Key L1 to L9 L10 L11 Function name (caption) Description 1 to 9 0 Type Enter numeric digits 1 to 9. Switches the character selection in the sequence capitals lowercase symbols capitals. Enters the currently highlighted character at the character cursor position. Clears the character string from the input buffer. Cancel the entry, and close the dialog box. Confirm the entry, and close the dialog box. [. . . ] Hold down the SHIFT key and press the B5 (Swap) key. The PREVIEW and AUTO EDIT buttons flash, and AUTO EDIT is enabled. At the same time, CH1 to CH4 on the LCD function display area light. If necessary, press the PREVIEW button and execute PREVIEW. [. . . ]