User manual SONY BM-535

[. . . ] Replace the batteries with new ones when the DICT/BATT lamp dims. After the batteries have been used for a while, the DICT/BATT lamp may flicker with the playback sound when you turn up the volume; however, this does not mean that you need to change the batteries. The unit will play back normally for a while even after the DICT/BATT lamp dims. [. . . ] ) , thus the minimum amount of tape is used. If you want recording to start even with small sound only with a loud sound Set to H L When a beep sounds and the DICT/BATT lamp goes out For AC operation, use the AC power adaptor recommended for the unit. Insert a cassette with the side to start listening facing the lid. Do not leave the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. Keep personal credit cards using magnetic coding or spring-wound watches etc. Away from the unit to prevent possible damage from the magnet used for the speaker. Should any solid object or liquid fall into the unit, remove the batteries or disconnect the AC power adaptor, and have the unit checked by qualified personnel before operating it any further. Two tape speeds can be selected for recording with the TAPE SPEED selector: 2. 4 cm/sec tape speed for recording, if you play back the recorded tape with another unit. Otherwise, the sound quality may be changed. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. When you release the lever, the unit will automatically return to the playback mode. Connect the earphone to the EAR jack and the sound does not come out through the speaker. Make notes or an outline of what you want to dictate. [. . . ] 5 hours (average) with alkaline batteries. Power requirements 3 V DC batteries R03 (size AAA) × 2/External DC 3 V power sources Dimensions (w/h/d) (incl. Batteries and cassette) Design and specifications are subject to change without notice. [. . . ]