User manual SONY CA-TX7

[. . . ] 5 Front and Left Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Switches and Knobs on the Rear and Right Side . . . . . . . . . . . . . . . . 7 Connectors on the Rear and Right Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Mounting on Video Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] After resolving the problem, press this button to reset the breaker. If the breaker gets activated even after correcting the connection, contact your Sony dealer. AAAAyA<H. L0. idx> 8 POWER switch Turns this unit's power supply on and off. To power the unit, set the switch to EXT or CCU according to the type of power source being used. EXT Power supplied via an optional CMA-8A/8ACE AC Adaptor connected to the DC IN connector (when this unit is connected to a camera control unit via a coaxial cable) CCU Power supplied via camera control unit (when this unit is connected to a camera control unit via a triaxial cable) Set this to OFF to turn off the power supply. When this unit is connected to a camera control unit via a triaxial cable, the following functions continue to operate even after the power is turned off. · Intercom communication · On/off control of the back tally indicator (when TALLY switch is ON) · Calling via CALL button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1) Return video: Video signals that are sent from a camera to a camera control unit and returned to the same or another camera so that the camera operators can check the recorded image. 6 Switches and Knobs on the Rear and Right Side AAAAyA<H. L0. idx> 1 Cursor knobs 2 TALLY switch 3 Back tally indicator 4 CALL button 7 UHF portable tuner taps 5 AUDIO SELECT (CH1/CH2) switches 6 MIC IN +48V (CH1/CH2) switch 8 CURSOR switch Illustration: CA-TX7 1 Cursor knobs (for DXC-D30/D30P) When the CURSOR switch 8 is set to A or B, this adjusts the position and size of the box cursor that is displayed in the viewfinder of the DXC-D30/D30P. H-POSITION: Adjusts the horizontal position of the box cursor. V-POSITION: Adjusts the vertical position of the box cursor. WIDTH: Adjusts the width of the box cursor. HEIGHT: Adjusts the height of the box cursor. 2 TALLY switch Set this switch to the ON position to activate the back tally indicator 3. 3 Back tally indicator (red) When the TALLY switch 2 is in the ON position, this indicator lights (in red) in response to this unit's operating status. It also lights when the CALL button on the camera control unit or remote control panel has been pressed. 4 CALL button Press this button to call the operator of the camera control unit or remote control panel. Pressing this button lights the tally indicator (red) on the camera control unit, on the remote control panel, and in the camera's viewfinder. This unit's back tally indicator 3 also lights if the TALLY switch 2 is in the ON position. 5 AUDIO SELECT (CH1/CH2) switches Select the source for signals to be transferred via the camera control unit's channel 1 and channel 2. CAMERA: Transfers audio from a microphone on the camera to the camera control unit. CA-MIC: Transfers audio from a microphone connected to this unit's MIC IN (CH1/CH2) connector to the camera control unit. CA-LINE: Transfers audio from a line output connected to this unit's MIC IN (CH1/CH2) connector to the camera control unit. 7 Location and Function of Parts 6 MIC IN +48V (CH1/CH2) switch Selects whether or not to supply power to a microphone connected via the MIC IN CH1 and CH2 connectors. Leave this switch in the ON position when using a microphone of phantom powering1) type. 7 UHF portable tuner taps When using an optional WRR-810A UHF Portable Tuner, attach the holder and bracket (supplied with the WRR-810A) for the portable tuner mounting adapter. For details of attaching and using the WRR-810A, see the Operating Instructions for the WRR-810A. AAAAyA<H. L0. idx> 8 CURSOR switch (for DXC-D30/D30P) Selects whether or not to display a box cursor in the DXC-D30/D30P Color Video Camera's viewfinder. [. . . ] Do not cover with cloth While the unit is in operation, do not cover it with a cloth or other material. This can cause the temperature to rise, leading to a malfunction. After use Turn the POWER switches on the unit and camera control unit off. Care If the body of the unit is dirty, wipe it with a dry cloth. [. . . ]