User manual SONY CADW538

[. . . ] OPERATING INSTRUCTIONS INSTRUCCIONES DE MANEJO MODE D'EMPLOI CA-DW538 COMPACT DISC CARRY COMPONENT SYSTEM SISTEMA DE COMPONENTES DE DISCOS COMPACTOS PORTATIL MINICHAINE PORTABLE A LECTEUR DE CD English : See page 2. Español : Ver la página 12. Français : Voir page 22. En E F 8B-CT5-903-01 001130ACK-I-FM U WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Precautions Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. [. . . ] Wipe gently from the center to the edge. Lens ENGLISH 5 A TAPE/ POWER/6STANDBY RADIO/BAND PHONES ROCK, POP, JAZZ QSURROUND e PRESET MEMORY s r DOWN TUNING UP t REPEAT/SLEEP FM MODE/ OSC VOLUME N, M A 1 TUNER OPERATION * REPEAT/SLEEP/FM MODE/OSC - If an FM stereo broadcast contains noise, press the button so that is displayed. Noise is reduced, although reception is monaural. To restore stereo reception, press the button again. - If a high-pitched sound is heard during AM recording, press the button repeatedly until the noise is reduced. Its position can be checked by "·" being on or off the display. * or MODE on the remote control Press * RADIO/BAND repeatedly to select the desired band. FM AM The power is turned on and the previously tuned station is received. * or BAND on the remote control (applicable when the AC cord is connected) 2 Press r, t (TUNING DOWN, UP) to select a station. During FM stereo reception, is displayed. To change the AM tuning interval The default setting of the AM tuning interval is 10 kHz/ step. If you use the unit in an area where the frequency allocation system is 9 kHz/step, change the interval as follows. 2 Press s while pressing RADIO/BAND to display the AM frequency. When the AM tuning interval is changed, the preset stations are cleared. After listening, press TAPE/POWER/6STANDBY to turn the power off. For better reception FM AM NOTE Extend the rod antenna and orient it for the best reception. Position the unit for the best reception. If the unit picks up noise from other electrical appliances nearby, like a TV or fluorescent lights, move the unit. For quick tuning (Auto Search) Keep r, t pressed until the tuner starts searching for a station. c PLAY on the remote control is also available. To select a preset number directly with the remote control Press the numbered buttons 0-9 and +10. Example: To select number 15, press +10 and 5. To select number 10, press +10 and 0. To clear a preset station Select the preset number first. Within 4 seconds, keep s pressed until "M" and the preset number disappear in the display. The higher numbers in the band are decreased by one. ENGLISH 7 B TAPE/ POWER/6STANDBY e PRESET MEMORY s TUNING r DOWN UP t CD REPEAT/SLEEP FM MODE/ OSC B 1 2 CD OPERATION To start play when the power is off, press CD. The power is turned on and play of the loaded disc begins (Direct Play Function). If you load a disc while the CD indicator flashes in step 2, play starts without pressing e. To select a track directly with the remote control, press the numbered buttons 0-9 and +10. CD play starts from the selected track and continues to the last track. Example: To select number 25, press +10, +10 and 5. [. . . ] After recording, press TAPE/POWER/6STANDBY to turn the power off. Continuous play After play on deck 2 finishes, play on deck 1 will start without interruption. During play on deck 2, press a then press c on deck 1. a on deck 1 will be released at the end of play on deck 2. 10 ENGLISH MICROPHONE MIXING Connect a microphone with a mini plug to the MIC jack and play a source to be mixed. To record the microphone mixing sound, insert a tape in deck 1 and press w. · During dubbing at high speed, the microphone mixing sound is not recorded. [. . . ]