User manual SONY CADW539

[. . . ] OPERATING INSTRUCTIONS INSTRUCCIONES DE MANEJO MODE D'EMPLOI CA-DW539 CD CARRY COMPONENT SYSTEM SISTEMA DE COMPONENTES DE DISCOS COMPACTOS PORTATIL MINICHAINE PORTABLE A LECTEUR DE CD English : See page 2. Español : Ver la página 12. Français : Voir page 22. En E F 8B-CT5-913-01 020320ACK-I-FM U WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. [. . . ] Press s while pressing TAPE/POWER/6STANDBY. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display. Leave the unit for a while and turn the power back on. ENGLISH 5 A 1 TUNER OPERATION * REPEAT/SLEEP/FM MODE/OSC - If an FM stereo broadcast contains noise, press the button so that is displayed. Noise is reduced, although reception is monaural. To restore stereo reception, press the button again. - If a high-pitched sound is heard during AM recording, press the button repeatedly until the noise is reduced. Its position can be checked by "·" being on or off the display. * or MODE on the remote control Press * RADIO/BAND repeatedly to select the desired band. FM AM The power is turned on and the previously tuned station is received. The selected mode R (Rock), P (Pop) or J (Jazz) appears in the display. To cancel, press the selected mode button. ROCK - Emphasizes the high and low range of music. POP - Emphasizes voice and midrange of music. JAZZ - Emphasizes the low range of music. When using the remote control, press EQ repeatedly until the desired mode is selected. The equalizer mode changes to ROCK, POP, JAZZ or no equalization, cyclically. T-BASS system The T-BASS system enhances the realism of lowfrequency sound. Frequency * or s STOP on the remote control En 3 Repeat steps 1 and 2. The next station will not be stored if a total of 15 preset stations have already been stored for a band. To listen to preset stations Select a band then press e PRESET repeatedly. c PLAY on the remote control is also available. To select a preset number directly with the remote control Press the numbered buttons 0-9 and +10. Example: To select number 15, press +10 and 5. To select number 10, press +10 and 0. To clear a preset station Select the preset number first. Within 4 seconds, keep s pressed until "M" and the preset number disappear in the display. The higher numbers in the band are decreased by one. ENGLISH 7 B 1 2 CD OPERATION To start play when the power is off, press CD. [. . . ] MIC VOL ­ Adjusts the microphone volume. If a howling sound is produced, turn the volume down. · To prevent howling, hold the microphone away from the speakers. The use of unidirectional type microphones is also recommended. DUBBING A TAPE Maintenance To clean the cabinet Use a soft cloth lightly moistened with mild detergent solution. [. . . ]