User manual SONY CCD-TR618E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Handycam® camcorder. With your Handycam, you can capture life's precious moments with superior picture and sound quality. Your Handycam is loaded with advanced features, but at the same time it is very easy to use. [. . . ] The battery pack is quickly discharging while the built-in light is turned on. When you do not use your camcorder, turn the built-in light off and remove the battery pack to avoid turning on the built-in light accidentally. When flickering occurs while shooting in the AUTO mode, press LIGHT until the indicator appears. The built-in light may turn on/off when you use the PROGRAM AE or backlight function while shooting in the AUTO mode. Using the built-in light The built-in light may be turned off when inserting or ejecting a cassette. When you use the conversion lens (optional), light from the built-in light is blocked and may not illuminate the subject properly. Remove the power source before replacing the bulb. (1) Remove the built-in light unit while pushing the hole under the built-in light unit using a wire. (2) Turn the bulb housing counterclockwise and detach from the built-in light unit. (4) Attach the bulb housing turning it clockwise, then replace the built-in light unit. Using the built-in light CAUTION When replacing the bulb, use only the Sony XB-3D halogen lamp (optional) to reduce the risk of fire. To prevent possible burn hazard, disconnect the power source before replacing and do not touch the bulb until the bulb becomes cool enough to handle (for about 30 minutes or more). Note To prevent the bulb from being smudged with finger prints, handle it with a dry cloth, etc. Connect your camcorder to the VCR using the A/V connecting cable supplied with your camcorder. You can record and edit a picture with the connected VCR by using your camcorder as a player. (1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. (2) Set the input selector on the VCR to LINE. Refer to the operating instructions of your VCR for more information. (4) Play back the recorded tape on your camcorder. Refer to the operating instructions of your VCR for more information. When you have finished dubbing a tape You can edit on VCRs that support the following systems 8 mm, Hi8, Digital8, VHS, S-VHS, VHSC, S-VHSC, Betamax, mini DV or DV Connect using an S video cable (optional) to obtain high-quality pictures With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. First, select the icon, then the menu item and then the mode. [. . . ] Do not use different types of batteries. Current flows from batteries when you are not using them for a long time. Wipe off the liquid in the battery compartment carefully before replacing the batteries. If you touch the liquid, wash it off with water. [. . . ]