User manual SONY HANDYCAM CCD-TR814

[. . . ] As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. [. . . ] The file formats that this system can play are as follows: MP3: file extension ". mp3" WMA: file extension ". wma" AAC: file extension ". m4a" MP4: file extension ". 3gp" or ". mp4" Note that even when file names have the above file extensions, if the actual files differ, playing these files may generate a loud noise which could damage the speaker system and the system may malfunction. Operations 1 Select the desired function. CD Press FUNCTION +/ repeatedly to select the CD function. USB Press FUNCTION +/ repeatedly to select the USB function. 2 3 Select the play mode. Press PLAY MODE repeatedly until "PGM" appears while the system is stopped. Select the desired track or file number. Press / repeatedly until the desired track or file number appears. When programming MP3 files, press +/ repeatedly to select the desired folder, and then select the desired file. Selected track or file number Total playing time of the selected track or file Continued GB 4 Program the selected track or file. Press ENTER to enter the selected track or file. " appears when the total program time exceeds 100 minutes for a CD, or when you select an MP3 file. USB The total program time cannot be displayed, so " . " appears. To cancel Program Play Press PLAY MODE repeatedly until "PGM" disappears while the system is stopped. To delete the last track or file of the program Press CLEAR while the system is stopped. To view program information, such as total track number of the program Press DISPLAY repeatedly. 5 6 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. To play your program of tracks or files, press . The program remains available until you remove the disc or the USB device. To play the same program again, press . 0GB Using optional audio components 1 Prepare the sound source. 2 3 4 5 Adjusting the sound To Generate a more dynamic sound (Dynamic Sound Generator X-tra) Set the sound effect Press DSGX. Connect additional audio component to the AUDIO IN jack on the unit using an audio analog cord (not supplied). Press VOLUME . Operations Turn down the volume. Select the AUDIO function. Press FUNCTION +/ repeatedly. EQ repeatedly to select "BASS" or "TREBLE, " and then press +/ repeatedly to adjust the level. Start playback. Start playback of the connected component and adjust its volume. Adjust the volume. Press VOLUME +/. 1GB Turning off the beep sound You can turn off the beep sounds of the system. Use buttons on the unit to perform the following procedure. Changing the display To Change information on the display1) Check the clock when the system is off 1) 1 2 Turn on the system. Press . Press DISPLAY repeatedly when the system is on. You cannot activate both the Play Timer and the Rec Timer at the same time. If you use either with the Sleep Timer, the Sleep Timer has priority. Use buttons on the remote to use the timer functions. Sleep Timer: You can fall asleep to music. This function works even if the clock is not set. Note on the DAB display information (CMT-Z100DiR only) The following is also displayed; up to 8 characters of service name, up to 128 characters of DLS (Dynamic Label Segment) and up to 16 characters of ensemble label. Press SLEEP repeatedly to select the time you want. Play Timer: You can wake up to CD, tuner, iPod or optional USB device at a preset time. Rec Timer: You can record a preset radio station at a specified time. Make sure you have set the clock. 1 Prepare the sound source. Play Timer Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific track or audio file, create your own program (page 29). Rec Timer Tune in the desired radio station or call up the desired preset station (page 18, 19). GB 2 3 Select the timer set mode. Press TIMER MENU. 7 Turn off the system. Set the timer. Press / repeatedly to select "PLAY SET?" or "REC SET?", and then press ENTER. "ON" appears, and the hour indication flashes. 4 Set the time to start playback or recording. Press / repeatedly to set the hour, and then press ENTER. Use the procedure above to set the minutes. [. . . ] Sony is not liable for any damage or injury caused by mishandling or improper installation, or installing any other than the specified product. Your Statutory Rights (if any) are not affected. To Sony Dealers The following instructions are for Sony Dealers only. Be sure to read safety precautions and pay special attention to safety during the installation, maintenance and checking this product. [. . . ]