User manual SONY CCD-TRV10E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Handycam VisionTM camcorder. With your Handycam Vision, you can capture life's precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use. [. . . ] Each time you press TITLE, the preset titles appear one by one. To superimpose from the beginning (6) Press TITLE when you want to turn off the title. (5) Press TITLE when you want to turn off the title. Note on selecting a title You cannot select a title during recording. You can record a 16:9 wide picture to watch on the 16:9 wide-screen TV. You can watch the picture of normal images on a wide-screen TV [c]. You can change the mode settings to further enjoy the features and functions. Set to ON so that beeps sound when you start/ stop recording, etc. â· Set to OFF when you do not want to hear the beep sound. Select BRIGHT to make the LCD screen brighter when shooting/playing back outdoors. The battery life becomes about 10% longer than it is when you select BRIGHT. Connect the camcorder to your VCR or TV to watch the playback picture on TV screen. When monitoring the playback picture by connecting the camcorder to your TV, we recommend you to use mains for the power source. While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion may occur. If your TV is already connected to a VCR Open the jack cover and connect the camcorder to the LINE IN inputs on the VCR by using the supplied A/V connecting cable. If you connect directly to TV Connect the camcorder to the inputs on the TV by using the supplied A/V connecting cable. You can create your own video programme by editing with any other h 8 mm, H Hi8, j VHS, k S-VHS, VHSC, K S-VHSC, or l Betamax VCR that has video/audio inputs. Turn down the volume of the camcorder while editing. Otherwise, picture distortion may occur. after connecting the camcorder to the VCR , (1) Set the POWER switch to PLAYER. (2) Insert a blank tape (or a tape you want to record over) into the VCR and insert your recorded tape into the camcorder. [. . . ] Two rotary heads, Helical scanning, FM system SP mode: 1 hour and 30 minutes (P5-90) LP mode: 3 hours (P5-90) Monaural, Phono jack, 327 mV, (at load impedance 47 kilohm), impedance less than 2. During camera recording using the LCD CCD-TRV10E: 4. AC-V16: 420 g (15 oz) AC-V16A: 450 g (16 oz) Design and specifications are subject to change without notice. 19) Use this button when recording in a low position. [. . . ]