User manual SONY CCD-TRV11E

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. [. . . ] To turn on the built-in light again, press LIGHT again in CAMERA mode. To turn off the built-in light To turn on the built-in light automatically press LIGHT until the indicator appears in the viewfinder. The built-in light automatically turns on and off according to the ambient brightness. Using the built-in light CAUTION Be careful not to touch the lighting section, because the plastic window and surrounding surfaces are hot while the light is on. It remains hot for a while after the light is turned off. Use with caution to reduce the risk of fire or injury to persons. Do not directly light at persons or materials from less than 1. 22 m (4 feet) during use and until cool. Turn the built-in light off when not in use. When you press LIGHT The indicator changes as follows: The built-in light turns off automatically in the following cases: ­ When it stays on in the AUTO mode for more than 5 minutes. ­ When you leave it on for more than 5 minutes with no cassette inserted or after the tape has run out. First, select the icon, then the menu item and then the mode. (5) If you want to change other items, select RETURN and press the dial, then repeat steps from 2 to 4. Menu items are displayed as the following icons: MANUAL SET CAMERA SET PLAYER SET TAPE SET SETUP MENU OTHERS Depending on your camcorder model The menu display may be different from that in this illustration. The viewfinder screen shows only the items you can operate at the moment. LIGHT z ON OFF Meaning To suit your specific shooting requirement (p. 46) To add special effects like those in films or on the TV to images (p. If you set to 40×/450×, digital zoom is activated and more than 20× to 40×/450× is performed digitally. If you set to 40×/460×, digital zoom is activated and more than 20× to 40×/460× is performed digitally. If you set to 40×/560×, digital zoom is activated and more than 20× to 40×/560× is performed digitally. 39) To record in the 16:9FULL mode To use the NightShot Light function (p. Meaning -- To minimize picture deterioration when editing To correct jitter To not correct jitter. [. . . ] Do not disassemble nor modify the battery pack. Charging while some capacity remains does not affect the original battery capacity. ­ CCD-TR728E only To avoid possible damage from battery leakage or corrosion, observe the following: · Be sure to insert the batteries with the + ­ polarities matched to the + ­ marks. Do not use a combination of new and old batteries. [. . . ]