User manual SONY CCD-TRV12

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. [. . . ] ­ CCD-TRV22/TRV33/TRV212 only You can use the Steady Shot to compensate for camera-shake. Do not use the Steady Shot when shooting a stationary object with a tripod. When you switch the Steady Shot on or off, the exposure may fluctuate. ­ CCD-TRV33 only You can record a cinemalike picture (CINEMA) to watch on a TV. You can also watch the picture without black bands on a wide-screen TV [c]. You can change the mode settings to further enjoy the features and functions. Set to ON so that beeps sound when you start/stop recording, etc. Set to OFF when you do not want to hear the beep sound. Select BRIGHT to make the LCD screen brighter when shooting/playing back outdoors. The battery life becomes about 10% longer than it is when you select BRIGHT. Connect the camcorder to your VCR or TV to watch the playback picture on the TV screen. When monitoring the playback picture by connecting the camcorder to your TV, we recommend you to use the house current for the power source. While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion may occur. If your TV is already connected to a VCR Open the jack cover and connect the camcorder to the LINE IN inputs on the VCR by using the supplied A/V connecting cable. : Signal flow If you connect directly to TV Connect the camcorder to the inputs on the TV by using the supplied A/V connecting cable. You can create your own video program by editing with any other h 8 mm, H Hi8, j VHS, k S-VHS, VHSC, K S-VHSC, l Betamax or ¬ ED Betamax VCR that has video/audio inputs. Turn down the volume of the camcorder while editing. Otherwise, picture distortion may occur. (2) Insert a blank tape (or a tape you want to record over) into the VCR and insert your recorded tape into the camcorder. (3) Play back the recorded tape on the camcorder until you locate the point where you want to start editing, then press P to put the camcorder in playback pause mode. Your camcorder is supplied with a lithium battery installed. [. . . ] ) AC-V16: 15 oz (420 g) AC-V16A: 16 oz (450 g) Design and specifications are subject to change without notice. 14) Use this button when recording in a low position. 14) Use this button when recording in a low position. To prepare the remote commander To use the Remote Commander, you must insert two size AA (R6) batteries. [. . . ]