User manual SONY CCD-TRV16

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. [. . . ] The title size changes as follows : SMALL y LARGE You cannot input more than 13 characters in LARGE size. The title position changes as follows : 1y2y3y4y5y6y7y8y9 The larger the position number, the lower the title is positioned. When you select the title size "LARGE", you cannot choose position 9. When you select the title size "LARGE" in the CINEMA mode, you cannot choose position 8 nor 9. When you are selecting and setting the title You cannot superimpose the title displayed on the screen. When you superimpose a title while you are recording The beep does not sound. You can make up to two titles and store them in your camcorder. Each title can have up to 20 characters. (3) Turn the SEL/PUSH EXEC dial to select the first line (CUSTOM1) or second line (CUSTOM2), then press the dial. (4) Turn the SEL/PUSH EXEC dial to select the column of the desired character, then press the dial. (5) Turn the SEL/PUSH EXEC dial to select the desired character, then press the dial. When flickering occurs while shooting in the auto mode, slide LIGHT to ON. The built-in light may turn on/off when you use the PROGRAM AE or backlight function while shooting in the auto mode. The built-in light may be turned off when inserting or ejecting a cassette. While the end search function is working, the built-in light is turned off. Remove the power source before replacing the bulb. (1) Remove the built-in light unit while pushing the hole under the built-in light unit using a wire. (2) Turn the bulb housing counterclockwise and detach from the built-in light unit. (4) Attach the bulb housing turning it clockwise, then replace the built-in light unit. Using the built-in light CAUTION When replacing the bulb, use only the Sony XB-3D halogen lamp (not supplied) to reduce the risk of fire. To prevent possible burn hazard, disconnect the power source before replacing and do not touch the bulb until the bulb becomes cool enough to handle (for about 30 minutes or more). Note To prevent the bulb from being smudged with finger prints, handle it with a dry cloth, etc. [. . . ] If any problem occurs, unplug your camcorder and contact your nearest Sony dealer. System Video recording system 2 rotary heads Helical scanning FM system Audio recording system Rotary heads, FM system Video signal PAL colour, CCIR standards Usable cassette 8mm video format cassette CCD-TRV37E/TRV48E/TRV57E: Standard 8 CCD-TRV16/TRV87E: Hi8 or standard 8 Recording/playback time (using 90 min. Cassette) SP mode: 1 hour and 30 minutes LP mode: 3 hours Fastforward/rewind time (using 90 min. ) CCD-TRV37E: 20× (Optical), 40×*(Digital) CCD-TRV48E/TRV57E/TRV67E/ TRV87E: 20× (Optical), 80×**(Digital) * 240× in some areas ** 360× in some areas Focal length 3. [. . . ]