User manual SONY CCD-TRV57E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Handycam VisionTM camcorder. With your Handycam Vision, you can capture life's precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use. [. . . ] (5) Turn the SEL/PUSH EXEC dial to select the desired character, then press the dial. (6) Repeat steps 4 and 5 until you have selected all characters and completed the title. (7) To finish making your own titles, turn the SEL/PUSH EXEC dial to select [SET], then press the dial. In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to change, then press the SEL/PUSH EXEC dial. Turn the SEL/PUSH EXEC dial to select [C], then press the dial to delete the title. If you take 5 minutes or longer to enter characters in the standby mode while a cassette is in your camcorder The power automatically goes off. The characters you have entered remain stored in memory. Turn STANDBY down once and then up again, then proceed from step 1. We recommend setting the POWER switch to PLAYER or removing the cassette so that your camcorder does not automatically turn off while you are entering title characters. Using the built-in light CCD-TRV57E/TRV67E/TRV87E only You can use the built-in light to suit your shooting situation. The recommended distance between the subject and camcorder is about 1. The built-in light turns on/off by turning STANDBY to STANDBY/LOCK. To turn off the built-in light To turn on the built-in light automatically slide LIGHT to AUTO. The built-in light automatically turns on and off according to the ambient brightness. However, the built-in light automatically turns off if the built-in light turns on for more than about 5 minutes. In this case, turn STANDBY down once and up again. Be careful not to touch the lighting section, because the plastic window and surrounding surfaces are hot while the light is on. It remains hot for a while after the light is turned off. Use with caution to reduce the risk of fire or injury to persons. Do not direct light at persons or materials from less than 1. 22 m (4 feet) during use and until cool. Using the built-in light notes · The battery pack is quickly discharging while the built-in light is turned on. [. . . ] 4) 0 lux (in the NightShot mode)*** *** Objects unable to be seen due to the dark can be shot with infrared lighting. input/output connectors S video output (CCD-TRV67E/ TRV87E only) 4-pin mini DIN Luminance signal: 1 Vp-p , 75 ohms , unbalanced Chrominance signal: 0. 3 Vp-p, 75 ohms, unbalanced Video output Phono jack, 1 Vp-p, 75 ohms, unbalanced Audio output CCD-TRV37E/TRV48E/TRV57E/ TRV67E: Monaural, phone jack, 327 mV CCD-TRV87E: Phono jacks (2: stereo L and R) 327 mV, (at output impedance 47 kilohms) impedance less than 2. 4 V (AC power adaptor) Average power consumption (when using the battery pack) During camera recording using LCD CCD-TRV37E/TRV48E/TRV57E/ TRV67E: 2. [. . . ]