User manual SONY CCD-TRV77E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Handycam VisionTM camcorder. With your Handycam Vision you can capture life's precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use. [. . . ] 22 m (4 feet) during use and until cool. Using the built-in light notes · The battery pack is quickly discharging while the built-in light is turned on. When you do not use your camcorder, slide LIGHT to OFF and remove the battery pack to avoid turning on the built-in light. When flickering occurs while shooting in the auto mode, slide LIGHT to ON. The built-in light may turn on/off when you use the PROGRAM AE or backlight function while shooting in the auto mode. The built-in light may be turned off when inserting or ejecting a cassette. While the end search function is working, the built-in light is turned off. Remove the power source before replacing the bulb. (1) Remove the built-in light unit while pushing the hole under the built-in light unit using a wire. (2) Turn the bulb housing counterclockwise and detach from the built-in light unit. (4) Attach the bulb housing turning it clockwise, then replace the built-in light unit. Using the built-in light CAUTION When replacing the bulb, use only the Sony XB-3D halogen lamp (not supplied) to reduce the risk of fire. To prevent possible burn hazard, disconnect the power source before replacing and do not touch the bulb until the bulb becomes cool enough to handle (for about 30 minutes or more). Note To prevent the bulb from being smudged with finger prints, handle it with a dry cloth, etc. Playing back a tape with digital effects During playback, you can process a scene using the digital effect functions: STILL, FLASH, LUMI. (1) During playback, press DIGITAL EFFECT and turn the SEL/PUSH EXEC dial until the desired digital effect indicator (STILL, FLASH, LUMI. Mode, the picture where you press the SEL/PUSH EXEC dial is stored in memory as a still picture. You cannot record image-processed pictures on your camcorder. Record them on the VCR using your camcorder as a player. In various speed playback, noise appears on the picture. You can search a picture to image-process by pressing ) or 0 in the playback mode. You cannot delete a picture stored in memory even if you stop playing back a tape. [. . . ] 4 V (AC power adaptor) Average power consumption (when using the battery pack) During camera recording using LCD 2. 2 feet) Design and specifications are subject to change without notice. When purchasing Sony video products, Sony recommends that you purchase accessories with this "GENUINE VIDEO ACCESSORIES" mark. 32, 35) p STOP (stop) 0 REW (rewind) ( PLAY (playback) ) FF (fastforward) P PAUSE (pause) The control buttons light up when you set the POWER switch to PLAYER. [. . . ]