User manual SONY CCD-TRV81E

[. . . ] ⷠCompensation for the contents of recordings cannot be provided, even if recording or playback is not possible due to a malfunction of the camcorder, etc. To view your recordings on a TV, you need a PAL system-based TV. ⷠTelevision programs, films, video tapes, and other materials may be copyrighted. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. [. . . ] Your camcorder returns to the standby mode when adjustment is complete. It takes about 10 seconds for adjustment. b Notes · Each time you eject a cassette, this setting will be canceled. When you set [ORC TO SET], a non-recorded section of about 0. However, note that this non-recorded section disappears from the tape when you continue recording from this section. ⷠTo check if you have already set this setting, select [ORC TO SET] in the menu settings. For about 8 seconds after you turn on your camcorder with the cassette inserted, and your camcorder calculates the remaining amount of tape. ⷠFor about 8 seconds after (play) is pressed. ⷠFor about 8 seconds after DSPL/BATT INFO is pressed to display the screen indicators. ⷠFor the period of tape rewinding, forwarding or picture search. For TRV255E/265E: You can record pictures with a stop-motion animated effect by alternately frame recording and then moving the subject a little. You can select or change the language used for the on-screen display (p. You can select from English, Simplified English, Traditional-Chinese, SimplifiedChinese, French, Spanish, Portuguese, German, Dutch, Italian, Greek, Russian, Arabic, or Persian. When you remove a cassette from your camcorder, and select the CAMERA mode, you can view the demonstration in about 10 minutes. GON OFF Select to see an overview of the functions available such as when you are using this camcorder for the first time. Select when you do not intend to use the [DEMO MODE]. You can view the demonstration only when the NIGHTSHOT PLUS switch is set to OFF. SHUT OFF] is set to [5 min] when the camcorder is used on the battery pack, the power will be turned off after approximately 5 minutes (p. You can select items listed below in the OTHERS menu. The screen shows the items you can operate at the moment. Select not to display date, time and the camera settings data during playback. You can adjust the time difference when using your camcorder abroad. [. . . ] to clean the LCD screen · If fingerprints or dust make the LCD screen dirty, it is recommended you using the LCD Cleaning Kit (optional) to clean it. When you use the LCD Cleaning Kit (optional), do not apply the cleaning liquid directly to the LCD screen. Use cleaning paper moistened with the liquid. Your camcorder has a pre-installed button-type battery to retain the date, time, and other settings even when the POWER switch is set to (CHG) OFF. [. . . ]