User manual SONY CCD-TRV99E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Handycam VisionTM camcorder. With your Handycam Vision you can capture life's precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use. [. . . ] When you select the title size "LARGE" you can choose 8 positions. notes on the title · Depending on size or position of the title, both of date and time or either of them is not displayed. ⷠIf you input 13 characters or more for a LARGE title, the title is automatically reduced into a proper size after the position is set. ⷠWhen the title is displayed, LCD BRIGHT and VOLUME indicators do not appear. You can make up to two titles and store them in the camcorder. we recommend to set the POWER switch to VTR or eject the cassette before you begin. Your title can have up to 20 characters. (3) Turn the control dial to select the first line (CUSTOM1) or second line (CUSTOM2), then press the dial. (4) Turn the control dial to select the column of the desired character, then press the dial. (5) Turn the control dial to select the desired character, then press the dial. (6) Repeat step 4 and 5 until you finish the title. (7) For finishing the titling work, turn the control dial to select SET, then press the dial. In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to edit, then change the title. note You can not enter over 20 characters title. If you take 5 minutes or longer to enter characters while a cassette is in the camcorder The power goes off automatically. Turn STANDBY down once and then up again, then proceed from step 1. In step 4, turn the control dial to select [M] then press the dial. Repeat this step until all characters are deleted. Re-recording a picture in the middle of a recorded tape ⭠CCD-TRV99E only You can insert a scene in the middle of a recorded tape by setting the starting and ending points. Re-recording a picture in the middle of a recorded tape (1) While the camcorder is in Standby mode, keep pressing the + (forward playback) or ­ (reverse playback) side of EDITSEARCH, and release the button where you want to end the insertion [b]. (3) Keep pressing the ­ side of EDITSEARCH and release the button at the point where you want to start the insertion [a]. Re-recording a picture in the middle of a recorded tape notes on re-recording · The picture and the sound may be distorted at the end of the inserted portion when it is played back. [. . . ] 23) Make sure that the length of the tripod screw is less than 6. 5 mm (9/32 inch) otherwise, you cannot attach the tripod securely and the screw may damage the camcorder. Note on the intelligent accessory shoe Supplies power to optional accessories such as a video light or microphone. The intelligent accessory shoe is linked to the STANDBY switch, allowing you to turn on and off the power supplied by the shoe. [. . . ]