User manual SONY CCD-Z7

[. . . ] Lights up when the power of the Digital Still Image Capture Adaptor is turned on. You can take a close-up at a distance of 10 mm (3/8 in). [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ⭠Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Do not apply too much force when changing the angle of the stand, or the camera head may come off. ⷠDo not apply too much force when turning the focus ring and the iris ring, or the camera may be damaged. If a light source which exceeds the recommended illumination, such as bright sunlight, is used, the image may not be displayed clearly. ⷠDo not focus on a stationary or bright object for too long, or the CCD color filter may be damaged. ⷠDo not aim the lens toward the sun, or the CCD color filter may be damaged. ⷠIf you record using a discharge lamp, such as fluorescent lamp, sodium lamp or mercury lamp, flickering may occur or the color may change. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. [. . . ] The picture does not appear on the Digital Still Image Capture Adaptor. Operating instructions (1) Design and specifications are subject to change without notice. [. . . ]