User manual SONY CCD-FX520

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. Taking moving images, and playing them back (To zoom greater than 20×, select the digital zoom power in D ZOOM in the menu settings. This chapter introduces you to the basic features of your camcorder. [. . . ] While the end search function is working, the built-in light is turned off. When you use the conversion lens (optional), the built-in light is blocked and may not illuminate the subject properly. Remove the power source before replacing the bulb. (1) Remove the built-in light unit while pushing the hole under the built-in light unit using a wire. (2) Turn the bulb housing anticlockwise and detach from the built-in light unit. (4) Attach the bulb housing by turning it clockwise, then replace the built-in light unit. Be sure to align the tab with the groove when inserting. Using the built-in light CAUTION When replacing the bulb, use only the Sony XB-3D halogen lamp (optional) to reduce the risk of fire. To prevent possible burn hazard, disconnect the power source before replacing and do not touch the bulb until the bulb becomes cool enough to handle (for about 30 minutes or more). Note To prevent the bulb from being smudged with finger prints, handle it with a dry cloth, etc. Connect your camcorder to the VCR using the A/V connecting cable supplied with your camcorder. Be sure to set the correct code depending on your VCR. Brand/ Märke Sony Aiwa Akai Alba Amstrad Baird Blaupunkt Bush CGM Clatronic Daewoo Ferguson Fisher Funai Goldstar Goodmans Grundig Hitachi ITT/Nokia Instant JVC Kendo Loewe Luxor Mark Matsui Mitsubishi * TV/VCR component Note on IR SETUP code The Easy Dubbing is not possible if the VCR does not support IR SETUP codes. (3) Setting your camcorder and the VCR to face each other Locate the Infrared rays emitter of your camcorder and face it towards the remote sensor of the VCR. ) apart, and remove any obstacles between the devices. 1 Insert a recordable tape into the VCR, then set to recording pause. When finished, the indicator changes to COMPLETE. When the VCR does not operate correctly · Place your camcorder at least 30 cm (12 in. You can select title, colour, size, and background colour. CUSTOM1 and CUSTOM2 are custom titles stored in your camcorder as instructed in "Making your own titles". The colour, size, or background colour, 1 Välj färg, storlek eller bakgrundfärg genom then press the dial. 2 Välj önskat alternativ genom att vrida på 3 Repeat steps 1 and 2 until the title is SEL/PUSH EXEC-ratten, tryck sedan på laid out as desired. [. . . ] We recommend turning on and operating your camcorder at least once per month to keep your camcorder in an optimum state for a long time. To prevent an accidental short circuit, do not allow metal objects to come into contact with the battery terminals. Never expose the battery pack to temperatures above 60°C (140°F), such as in a car parked in the sun or under direct sunlight. Do not expose the battery pack to any mechanical shock. [. . . ]