User manual SONY CCD-FX710

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. [. . . ] (6) Repeat steps 4 and 5 until you have selected all characters and completed the title. (7) To finish making your own titles, turn the SEL/PUSH EXEC dial to select [SET], then press the dial. In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to change, then press the SEL/PUSH EXEC dial. Turn the SEL/PUSH EXEC dial to select [C], then press the dial to delete the title. If you take 5 minutes or longer to enter characters in the standby mode while a cassette is in your camcorder The power automatically goes off. The characters you have entered remain stored in memory. Turn STANDBY down once and then up again, then proceed from step 1. We recommend setting the POWER switch to PLAYER or removing the cassette so that your camcorder does not automatically turn off while you are entering title characters. Using the built-in light CCD-TR617E/TR717E/TR918E only You can use the built-in light to suit your shooting situation. The recommended distance between the subject and camcorder is about 1. The built-in light turns on/off by turning STANDBY to STANDBY/LOCK. (1) During playback, press DIGITAL EFFECT and turn the SEL/PUSH EXEC dial until the desired digital effect indicator (STILL, FLASH, LUMI. Mode, the picture where you press the SEL/PUSH EXEC dial is stored in memory as a still picture. Playing back a tape with digital effects notes · You cannot process externally input scenes using the digital effect function. To record pictures that you have processed using the digital effect function, record the pictures on the VCR. You can search a picture to image-process by pressing M or m in the playback mode. You cannot delete a picture stored in memory even if you stop playing back a tape. Connect your camcorder to the VCR using the A/V connecting cable supplied with your camcorder. (1)Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. (2) Set the input selector on the VCR to LINE. Refer to the operating instructions of your VCR for more information. (4)Play back the recorded tape on your camcorder. [. . . ] If you touch the liquid, wash it off with water. If the liquid get into your eyes, wash your eyes with a lot of water and then consult a doctor. If any problem occurs, unplug your camcorder and contact your nearest Sony dealer. System Video recording system 2 rotary heads Helical scanning FM system Audio recording system Rotary heads, FM system Video signal PAL colour, CCIR standards Usable cassette 8 mm video format cassette CCD-TR417E/TR427E/TR617E: Standard 8 CCD-FX710/TR918E: Hi8 or standard 8 Recording/playback time (using 90min. [. . . ]