User manual SONY CCD-TR3

[. . . ] To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. 2 Table of contents Quick Start Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Getting started Using this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Checking supplied accessories . . . . . . . . . . . . . . [. . . ] ·To prevent possible burn hazard, disconnect the power source before replacing and do not touch the bulb until the bulb becomes cool enough to handle (for about 30 minutes or more). Note To prevent the bulb from being smudged with finger prints, handle it with a dry cloth, etc. If the bulb is smudged, wipe it completely. 50 -- Advanced Playback Operations -- Playing back a tape with digital effects ­ CCD-TRV87 only Duringplayback, youcanprocessasceneusingthedigitaleffectfunctions:STILL, FLASH, LUMI. and TRAIL. (1) During playback, press DIGITAL EFFECT and turn the SEL/PUSH EXEC dial until the desired digital effect indicator (STILL, FLASH, LUMI. Thedigitaleffectindicatorlightsupandthebarsappear. IntheSTILLor LUMI. mode, the picture where you press the SEL/PUSH EXEC dial is stored inmemoryasastillpicture. (3) Turn the SEL/PUSH EXEC dial to adjust the effect. Fordetailsofeachdigitaleffectfunction, seepage38. Advanced Playback Operations 1 DIGITAL EFFECT 2 STILL STILL 3 To cancel the digital effect function Press DIGITAL EFFECT. Notes ·Youcannotprocessexternallyinputscenesusingthedigitaleffectfunction. ·Torecordpicturesthatyouhaveprocessedusingthedigitaleffectfunction, recordthe picturesontheVCR. modes ·Youcansearchapicturetoimage-processbypressing Mor mintheplayback mode. However, noiseappearsonthepicture. Connect using an S video cable (not supplied) to obtain high-quality pictures With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. Connect an S video cable (not supplied) to the S video jacks of both your camcorder and VCR. If your VCR or TV does not have an S VIDEO OUT jack Do not connect an S video cable (not supplied) to your camcorder. If you connect an S video cable, the picture may not appear on screen. 54 -- Customizing Your Camcorder -- Changing the menu settings To change the mode settings in the menu settings, select the menu items with the SEL/ PUSH EXEC dial. The default settings can be partially changed. First, select the icon, then the menu item and then the mode. (1) In the standby or VTR (CCD-TRV87)/PLAYER (CCD-TR3/TRV47/TRV57/ TRV67) mode, press MENU. (2) Turn the SEL/PUSH EXEC dial to select the desired icon, then press the dial to set. (3) Turn the SEL/PUSH EXEC dial to select the desired item, then press the dial to set. (4) Turn the SEL/PUSH EXEC dial to select the desired mode, and press the dial to set. RETURN and press the dial, then (5) If you want to change other items, select repeat steps from 2 to 4. For details, see "Selecting the mode setting of each item" (p. [. . . ] 14 (car battery) . . . . . . . . . . . . . . . . . . . . . . . . . . 14 (battery pack) . . . . . . . . . . . . . . . . . . . . . . . . . 9 Power zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 E Earphone jack . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]