User manual SONY CCD-TR31

[. . . ] With your Handycam Vision, you can capture life's precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for years to come. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For the customers in the U. S. A. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] HAPPY BIRTHDAY HAPPY HOLIDAYS CONGRATULATIONS!OUR SWEET BABY WEDDING VACATION THE END [TITLE] : END PRESET TITLE HELLO!HAPPY BIRTHDAY HAPPY HOLIDAYS CONGRATULATIONS!OUR SWEET BABY WEDDING VACATION THE END RETURN [TITLE] : END PRESET TITLE HELLO!HAPPY BIRTHDAY HAPPY HOLIDAYS CONGRATULATIONS!OUR SWEET BABY WEDDING VACATION THE END RETURN [TITLE] : END TITLE THE END [TITLE] : END SMALL TITLE SIZE LARGE THE END [TITLE] : END THE END THE END 44 Superimposing a title To superimpose the title from beginning After step 7, press START/STOP to start recording. To superimpose the title while you are recording After pressing START/STOP to start recording, start from step 1. In this case, beep is not heard. To select the language of preset title When you want to select the language, select return to step 2. Then select language and Advanced operations To use the custom title When you want to use the custom title, select in step 2. Notes on superimposing a title ·If you have not given any custom title, "­ ­ ­ ­ . . . " appears on the display. ·The FADER function works while the title is displayed, however, the title does not fade. ·If you display the menu or title menu while superimposing a title, the title is not recorded while the menu or title menu is being displayed. The recording continues. 47 Optimizing the recording condition Use this feature to check the tape condition before recording, so that you can get the best possible picture (ORC). (1) While the camcorder is in Standby mode, press MENU to display the menu. (2) Turn the control dial to select Ò, then press the dial. (3) Turn the control dial to select ORC TO SET, then press the dial. The camcorder takes about 5 ­ 10 seconds to check the tape condition and then returns to Standby mode. 1 MENU 2 3 4 STA TAPE SET REC MODE ORC TO SET REMAIN TAPE SET SP REC MODE ORC TO SET REMAIN RETURN TAPE SET REC MODE ORC TO SET REMAIN RETURN START/STOP KEY CK LO STBY 0:00:00 ND ORC BY START/STOP Each time you insert the cassette Perform the above procedures. Notes on the ORC function ·When you set ORC TO SET, the recording on the tape is erased for about 0. 1 second so that the camcorder can check the tape condition. Be careful when you use a recorded tape. The 0. 1 second blank is erased if you record from the point where you set ORC TO SET for more than 2 seconds, or if you record over the blank. ·You cannot use this function on a tape with the red mark on the cassette exposed. ·ORC stands for "Optimizing the Recording Condition. " 48 Using the built-in light ­ CCD-TRV36/TRV43/TRV46 only You can use the built-in light to suit your shooting situation. The recommended distance between the subject and camcorder is about 5 feet (1. 5 m). While the camcorder is in Standby mode, slide LIGHT to ON. [. . . ] 11 Car battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Charging battery . . . . . . . . . . . . . . . . . . . . . . . 64 Clock set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]