User manual SONY CCD-V701

[. . . ] To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. 2 Table of contents Before you begin Using this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Checking supplied accessories . . . . . . . . . . . . . . [. . . ] OUR SWEET BABY WEDDING VACATION THE END RETURN [TITLE] : END PRESET TITLE HELLO!HAPPY BIRTHDAY HAPPY HOLIDAYS CONGRATULATIONS!OUR SWEET BABY WEDDING VACATION THE END RETURN [TITLE] : END TITLE THE END [TITLE] : END SMALL TITLE SIZE LARGE THE END [TITLE] : END THE END THE END 44 Superimposing a title To superimpose the title from beginning After step 7, press START/STOP to start recording. To superimpose the title while you are recording After pressing START/STOP to start recording, start from step 1. In this case, beep is not heard. To select the language of preset title When you want to select the language, select return to step 2. Then select language and Advanced operations To use the custom title When you want to use the custom title, select in step 2. Notes on superimposing a title ·If you have not given any custom title, "­ ­ ­ ­ . . . " appears on the display. ·The FADER function works while the title is displayed, however, the title does not fade. ·If you display the menu or title menu while superimposing a title, the title is not recorded while the menu or title menu is being displayed. Title color changes as follows: WHITE ~ YELLOW ~ VIOLET ~ RED ~ CYAN ~ GREEN ~ BLUE Title size changes as follows: SMALL ~ LARGE Title position changes as follows: When you select the title size "SMALL", you can choose 9 positions. When you select the title size "LARGE" you can choose 8 positions. Notes on the title ·Depending on size or position of the title, both of the date and time or either of them is not displayed. (4) Press START/STOP. The camcorder takes about 5 to 10 seconds to check the tape condition and then returns to Standby mode. 1 MENU 2 3 4 STA TAPE SET REC MODE ORC TO SET REMAIN TAPE SET SP REC MODE ORC TO SET REMAIN RETURN TAPE SET REC MODE ORC TO SET REMAIN RETURN START/STOP KEY CK LO STBY 0:00:00 ND ORC BY START/STOP Each time you insert the cassette Perform the above procedures. Notes on the ORC function ·When you set ORC TO SET, the recording on the tape is erased for about 0. 1 second so that the camcorder can check the tape condition. Be careful when you use a recorded tape. The 0. 1 second blank is erased if you record from the point where you set ORC TO SET for more than 2 seconds, or if you record over the blank. ·You cannot use this function on a tape with the red mark on the cassette exposed. ·ORC stands for "Optimizing the Recording Condition. " 48 Using the built-in light ­ CCD-TRV36/TRV46 only You can use the built-in light to suit your shooting situation. The recommended distance between the subject and camcorder is about 1. 5 m. While the camcorder is in Standby mode, slide LIGHT to ON. The built-in light turns on/off by turning on/off STANDBY. Advanced operations LIGHT To stop using the built-in light Slide LIGHT to OFF. To turn on the built-in light automatically Slide LIGHT to AUTO. The built-in light automatically turns on and off according to the ambient brightness. However, if the built-in light turns on for more than about 5 minutes, it automatically turns off. [. . . ] 11 Car battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Charging battery . . . . . . . . . . . . . . . . . . . . . . . 64 Clock set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]