User manual SONY CCD-V801

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. [. . . ] In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to edit, then change the title. note You can not enter over 20 characters title. If you take 5 minutes or longer to enter characters while a cassette is in the camcorder The power goes off automatically. Turn STANDBY down once and then up again, then proceed from step 1. In step 4, turn the control dial to select [M] then press the dial. Repeat this step until all characters are deleted. Do not erase the title by selecting empty spaces. If you do so, a title full of empty spaces is stored. Re-recording a picture in the middle of a recorded tape CCD-V801 only You can insert a scene in the middle of a recorded tape by setting the starting and ending points. Re-recording a picture in the middle of a recorded tape (1) While the camcorder is in Standby mode, keep pressing the + (forward playback) or ­ (reverse playback) side of EDITSEARCH, and release the button where you want to end the insertion [b]. (3) Keep pressing the ­ side of EDITSEARCH and release the button at the point where you want to start the insertion [a]. To search for the beginning of a specific date (3) When the current position is [b], press 0 to search towards [a] or press ) to search towards [c]. To scan the beginning of all days To view pictures during searching or scanning Press ( and then press 0 or ). If you do Date Search or Date Scan during playback While the camcorder is looking for the date, a fast forward or rewind picture is displayed. If you have erased or rewritten the index signal The point at which the date changes may be out of position by about 10 seconds of playback. notes on Date Search and Date Scan mode · If a day's recording is not longer than 2 minutes, the camcorder may not accurately find its boundaries. Date Search and Date Scan do not function on a tape recorded by a camcorder without the Data Code function. Using the Remote Commander, you can easily go back to the desired point on a tape after playback. We recommend you to connect the camcorder to your TV or VCR to view the picture on the TV screen. If the viewfinder indicators do not appear on the TV screen during operation, press DISPLAY on the Remote Commander. The tape stops automatically when the counter reaches approximately zero. Something must be recorded on the tape in order for the tape counter to function. [. . . ] Visible minimum low light expresses the light level to produce a visible signal. ** Object invisible for the dark can be shot with infrared lighting. 4 V (AC power adaptor) Average power consumption (when using the battery pack) During camera recording CCD-TR411E/TR412E/TR511E: 2. ) CCD-TR411E/TR412E: 790 g (1 lb 11 oz) CCD-TR511E/TR640E/TR840E/ TR845E: 800 g (1 lb 12 oz) excluding the battery pack, lithium battery, cassette and shoulder strap CCD-TR411E/TR412E: 930 g (2 lb) CCD-TR511E/TR640E/TR840E/ TR845E: 940 g (2 lb 1 oz) including the battery pack NP-F330, lithium battery CR2025, cassette and shoulder strap Microphone CCD-TR411E/TR412E/TR511E/ TR640E: Monaural type CCD-TR840E/TR845E: Stereo type Supplied accessories See page 7. [. . . ]