User manual SONY CD-CASE4 DATASHEET

[. . . ] 4 AUXILIARY EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 OTHER FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In addition to ordinary CDs, CD-Rs or CD-RWs can be read by this unit. However, NEVER use a CD-R or CD-RW that contains no data or data in the wrong format, such as MP3 or other computer files. For installation and connections, refer to the separate "INSTALLATION AND CONNECTIONS. " Pressing the reset button will erase the clock and some memorized functions. DEMO (Demonstration) mode The unit has an extra display (DEMO) mode which demonstrates the illumination modes of the unit. The unit switches to DEMO mode automatically if you turn the unit on and leave it as it is for 5 seconds after all the connections have been completed. To cancel DEMO mode 1 During DEMO mode, press and hold Jog dial (PUSHSOURCE) until "ILL" appears on the display. 2 Press + or ­ to select "DE. " 3 Turn Jog dial to select "0. " To resume DEMO mode, select "1" in step 3. (See the illustration on page 2. ) 1 ENGLISH THEFT PROTECTION Take the front panel with you when leaving the car, and keep it in the supplied carrying case. BASIC OPERATION, AUDIO AND CLOCK ADJUSTMENT PWR/ATT SEL Jog dial (PUSH-SOURCE) Detaching the front panel Before detaching the front panel, remove the CD to prevent possible damage to the unit. 1 Press z to remove the CD. 2 Press and hold PWR/ATT until the unit turns off. (Hold the panel with one hand to prevent accidentally dropping it. ) 4 Remove the panel. DSPL TU (TUNER) +/­ Turning the unit on/off · Press PWR/ATT to turn on the unit. The unit also turns on when you insert a CD. · Press and hold PWR/ATT until the unit turns off. Note Attaching the front panel 1 Engage the left side of the front panel to the left catch on the unit. Most operations described in this manual require the unit to be turned on before starting the operation, unless explicitly stated otherwise. 2 Push the panel forward until it locks. Be sure not to press any buttons while you are attaching the panel. Changing the source mode 1 Press Jog dial (PUSH-SOURCE). Pressing Jog dial (PUSH-SOURCE) cycles through source modes in the following order: TUNER (FM1/FM2/FM3/AM1/AM2) CD* AUX * "CD" does not appear in the display when there is no CD in the unit. Adjusting the volume Note Do not touch the connector on the reverse side of the front panel. This could cause a poor or faulty connection. 1 Turn Jog dial. VOLUME indicator appears. Muting the sound 1 Press PWR/ATT briefly. ATT indicator flashes. The unit automatically stores up to 6 stations for each band. After completion of automatic presetting, the unit tunes in to the station stored on preset station button 1. To cancel automatic presetting, press PS/A. ME again. t/g, r/f INT REP1 SHUF 1 Insert a CD. CD indicator appears on the display. If a CD is already inserted, press Jog dial (PUSHSOURCE) repeatedly to select CD play mode. In normal play, when the last track finishes, the unit returns to the first track and continues to play. Checking the preset stations (Preset Scan) 1 Press PS/A. ME briefly. Each preset station will be tuned in for 5 seconds in order. To cancel Preset Scan, press PS/A. ME again or any preset station button. ENGLISH 4 Labeled-side up Note During Shuffle Play, pressing r allows you to skip only to the beginning of the current track, not to the previous track. AUXILIARY EQUIPMENT Track number Listening to a cassette/MD/MP3 portable player or other equipment You can listen to equipment connected to the unit. Refer to the operating instructions for the corresponding equipment for more detailed information. Be sure to remove inserted CDs to prevent possible damage to the unit before connecting the equipment. Elapsed playing time To Eject a CD Skip to the next track Press z CD indicator t/g Go back to the beginning r/f of the current track Each extra press skips backward one extra track Locate a specific point in a track Press and hold r/f or t/g until you find the point. Jog dial (PUSH-SOURCE) AUX jack 1 Connect a cassette/MD/MP3 portable player or other equipment to the unit's AUX jack (3. 5 mm dia. ). 2 Press Jog dial (PUSH-SOURCE) repeatedly until Note · When you play a CD that is already inserted, CD play starts at the point where it stopped the previous time. A newly inserted CD starts from the first track. · A CD-R or CD-RW may take some time to start playing back, but this is not a malfunction. [. . . ] LABOR PARTS Car Audio 1 year 1 year WHO PERFORMS AIWA'S WARRANTY?Aiwa's warranty obligations must be performed by an Aiwa Authorized Service Center. For the name of the Aiwa Authorized Service Center nearest to you call toll free 1-800-289-2492 (1-800-BUY-AIWA). WHAT YOU MUST DO To obtain warranty performance, you must take the product, or deliver the product freight prepaid, to an Aiwa Authorized Service Center. If shipped, the product must be packaged so that it is protected from possible shipping damage. [. . . ]