User manual SONY CD-CX2270

[. . . ] 2 RADIO OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CD PLAYER OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 AUXILIARY EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 OTHER FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To restore volume, briefly press PWR/MUTE again. ENGLISH 2 Adjusting sound You can select the following modes for adjusting sound depending on the music you listen to: BASS (low frequencies), TRE (high frequencies), BAL (left/right), FAD (front/ rear) and H-BASS (high bass). Setting the clock 1 Press and hold DISP until the clock indicator flashes in the display. 2 Press i (to set hour) or k (to set minute), and then turn AUDIO CONTROL. 3 Press DISP. 1 Press SEL repeatedly to select the mode to be adjusted. The selected mode's indicator flashes. 2 Turn AUDIO CONTROL to increase/decrease the level or to select on/off for the selected mode. Displaying the clock 1 Press DISP. To return to the former display, press DISP again. Note Adjust the level or select on/off within 5 seconds, or the selected mode will return to previous state. RADIO OPERATION Tuning in to a station (Seek/Manual Tuning) LO Aligning the source levels (Source Level Adjuster) Volume may vary each time you change the source mode. In this case, you can align each source mode's volume to almost the same level. 1 Press SRC or BAND repeatedly to select the desired mode. "LA 0" appears in the display. 3 Turn AUDIO CONTROL to adjust the level. i/k BAND Stereo indicator Local indicator Note Adjust the level within 5 seconds, or the selected mode will be canceled. Restoring the factory settings Band indicator Frequency indication 1 Turn off the unit. 2 Press and hold DISP until "LA --" appears in the display. 1 Press BAND repeatedly to select the desired band (FM1, FM2, FM3, AM1, or AM2). 2* Press i (to move to higher frequencies) or k (to Note You can restore the factory settings only for VOL, BASS, TRE, BAL, FAD, and H-BASS, and aligned source volume levels. move to lower frequencies) to tune in to a station. "ST" appears in the display when an FM station is broadcasting in stereo, and receiving conditions are good. *Seek Tuning and Manual Tuning · Press and hold i or k until seek Tuning starts. The unit locates a station automatically (Seek Tuning). · Press i or k repeatedly to search for a desired station while increasing or decreasing the frequency step by step (Manual Tuning). To stop Seek Tuning, press i or k again. Muting button beep sounds 1 Turn off the unit. 2 Press and hold SEL until "bEEP" appears in the display. 3 Turn AUDIO CONTROL to select on (level indicators appear) or off (level indicators disappear). 4 Press SEL. 3 ENGLISH Monaural mode When signals become weak, or reception becomes poor, the unit automatically switches to Monaural mode to reduce noise. Presetting stations manually (Manual Memory) 1 Press BAND repeatedly to select the desired band (FM1, FM2, FM3, AM1, or AM2). Local mode Local mode allows you to tune in only to strong stations during Seek Tuning. 1 Press LO before you start seek tuning. To return to Distant mode, press LO again. [. . . ] 2 Turn AUDIO CONTROL to select "D 0 (bright)" or "D 1 (dimmed). " 1 VOLUME + button: To increase the volume. 2 VOLUME - button: To decrease the volume. 3 FUNCTION button: To select Radio, CD Play, or AUX mode. 4 DISC/PRESET button: (CD) To skip back to the beginning of the current track. [. . . ]