User manual SONY CDL-SE10 DATASHEET

[. . . ] Owner's Record The model and the serial numbers are located at the bottom. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. ___________________ Certain countries may regulate disposal of the battery used to power this product. [. . . ] /> buttons x ·CHG button ubutton 8 Playing tracks repeatedly During playback, press REPEAT/ENTER. (Repeat play) You can play tracks repeatedly in normal, INTRO PGM, single, shuffle and RMS play modes. Note on . /> During Repeat play, you can locate the first track after the last track by pressing > repeatedly. You can also locate the last track after first track by pressing . repeatedly. Playback options 9 Selecting tracks by listening to songs' intro (INTRO PGM play) You can program the CD player to play only the tracks you like listening to while the CD player plays the beginning of every track (song's intro) one by one. 1 During playback, press PLAY MODE repeatedly until "INTRO PGM" appears. Flashing slowly 2 3 Press u. The CD player starts playing the first 15 seconds of every track. "INTRO PGM" flashes faster. Press REPEAT/ENTER during a song's intro when you want to select the track. When all tracks on the CD are played, "INTRO PGM" stops flashing and the CD player starts playing the tracks you selected. To finish selecting tracks before all tracks are played, press u . Playing a single track During playback, press PLAY MODE repeatedly until "1" appears. (Single play) Playing tracks in random order During playback, press PLAY MODE repeatedly until "SHUF" appears. (Shuffle play) 10 Playing tracks in your favorite order (RMS play) You can program the CD player to play up to 22 tracks in your favorite order. 1 2 During playback, press PLAY MODE repeatedly until "RMS" appears. Press . or > to select a track. Playback options Track number 3 Press REPEAT/ENTER to enter the selected track. "00" appears. 4 5 Repeat steps 2 and 3 to select the tracks in your favorite order. Press u to start the RMS play. To check the program During programming: Press REPEAT/ENTER repeatedly before step 5. During the RMS play: Press PLAY MODE repeatedly until "RMS" flashes, then press REPEAT/ENTER. When the batteries are completely charged, the indicator turns off. If you press x·CHG when the charge has already been completed, the indicator flashes. Being charged Connecting a power source 2 Insert two rechargeable batteries by matching the + to the diagram inside the battery compartment and close the lid. The indicator sections light up in succession Completely charged 4 Disconnect the AC power adaptor. (Continued) 17 Using the rechargeable batteries Using dry batteries Use only the following dry battery type for your CD player: · LR6 (size AA) alkaline batteries Note Be sure to remove the AC power adaptor when using the dry batteries. To remove the rechargeable batteries Remove the batteries as illustrated below. 1 When to charge the rechargeable batteries When the batteries become weak, "Lo" and the indicator appear in the display. To keep the original battery capacity for a long time, charge the batteries only when they are completely depleted. When to replace the rechargeable batteries If the battery life becomes shorter by about half, replace the batteries with new rechargeable batteries. Note on the rechargeable batteries If the battery is new or has not been used for a long time, it may not be charged completely until you charge and discharge it several times. To attach the battery compartment lid If the battery compartment lid is detached by an accidental drop, excessive force, etc. , attach it as illustrated below. Open the battery compartment inside your CD player. 2 Insert two LR6 (size AA) alkaline batteries by matching the + to the diagram inside the battery compartment and close the lid. To remove the batteries Remove the batteries in the same way as rechargeable batteries. When to replace the batteries When the batteries become weak, "Lo" and the indicator appear in the display. Replace both batteries with new ones. 18 Notes on the power source Disconnect all power sources when the CD player is not used. On AC power adaptor · Use only the AC power adaptor supplied or recommended in "Accessories (supplied/ optional). " Do not use any other AC power adaptor. It may cause a malfunction. Polarity of the plug · When disconnecting the AC power adaptor from the AC outlet, grasp the adaptor itself. · Do not touch the AC power adaptor with wet hands. On rechargeable batteries and dry batteries · Do not charge the dry batteries. [. . . ] When you press u, "Lo" and , or "00" appear in the display. "Hl" or "dc" appears in the display alternately. Cause and/or corrective actions c Set the AVLS switch to "NORM. " (page 13) c Connect the plugs firmly. Clean the plugs with a dry soft cloth periodically. [. . . ]