User manual SONY CDP-295 service manual

[. . . ] To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. Using the Player with Another Component This section describes how to hook up the CD player to an amplifier. Be sure to turn off the power of each component before making the connections. You can control the player using the supplied remote. [. . . ] If you check the order after you start playing, the display shows only the remaining steps. You can change your programme before you start playing. You can have the player create a programme that will fit the length of the tape. The player automatically creates a programme, keeping the original order of the disc. The programme can contain up to 32 steps (a pause inserted between steps is counted as one step). Press CHECK until the track you don't want appears in the display, then press CLEAR. Each time you in the programme press the button, the last track will be cleared. Change the whole Hold down CLEAR until programme "CLEAR" appears in the display. Completely Create a new programme following the programming procedure. You can manually fade in or out to prevent tracks from starting or ending abruptly. Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector. You can label discs using up to 12 characters and have the player display the Disc Name each time you select the disc. The Disc Name can be anything you like, such as a title, musician's name, category or date of purchase. Custom Files are stored not on the disc, but in the player's memory. It means you cannot use Custom Files when you play the disc on other players. If the disc title has more than 12 characters, the first 12 characters of the disc title are stored. While holding down CLEAR, press POWER to turn on the player. 4 Turn l AMS L until the character As you turn l AMS L clockwise, the characters appear in the following order. Turn l AMS L counterclockwise to go back to the previous character. 4 Press CAPS to find the letter type you The selected character lights up, and the flashing cursor appears to indicate the next space to be input. Press m/M until the display shows the track number you want. To do other operations, use the controls on the second player or the supplied remote. [. . . ] In this case, remove the disc and leave the player turned on for about an hour until the moisture evaporates. Do not turn up the volume while listening to a portion with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level portion is played. Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. [. . . ]