User manual SONY CDP-C260Z

[. . . ] Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The following caution label is located inside of the unit. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] You can play a specific portion in a track repeatedly. This might be useful when you play a music instrument or memorize lyrics. Note that you cannot repeat a portion extending to two tracks. You can arrange the order of the tracks on a disc and create your own program. While playing a disc, press A-B when you find the starting point (point A) of the portion to be played repeatedly. "A-B" lights up in the display and the player plays this specific portion repeatedly. Press the number buttons of the tracks you want to program in the order you want. To program tracks numbered over 12 (or 10 when using the remote commander), use the >10 button (see page 9). Setting a new starting point You can move the repeated portion forward by changing the starting point. 1 Press A-B while the player is repeating the specific portion. 2 When you reach the new ending point, press A-B again. While searching for the point, the display shows the elapsed time with frame number so you can set the point accurately. When searching for the cue point, you can change the amount of time the player repeats from 1 to 9 seconds. the repeating time is factory set to 2 seconds. You can also change the repeating time before you start searching While playing a disc, press REHEARSAL just before the cue point you want to set. "REHEARSAL" appears in the display and the player plays the next few seconds repeatedly. Track number being played Turn the JOG dial until the repeating time you want appears in the display. Playing time with frame number If you want to shift the starting point forward, turn the JOG dial clockwise or press +. To shift the starting point backward, turn the JOG dial counterclockwise or press =. Each change in the JOG dial position or press of the =/+ buttons shifts the starting point. When shifting the starting point to be played repeatedly, you can change the increment from 1 to 74 frames. the shift increment is factory set to 24 frames. [. . . ] Do not use any commercially available stabilizer and/or disc protector. If you do, the disc and the player may be damaged. After playing, store the disc in its case. Before playing, clean the disc with a cleaning cloth. [. . . ]