User manual SONY CDP-C305

[. . . ] Leakage current can be measured by any one of three methods. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers' instructions to use these instruments. The Data Precision 245 digital multimeter is suitable for this job. [. . . ] Both the fluorescent indicator tubes and LEDs will light up completely. To end this mode, press the 1/u mode. $ $ $ This unit (Copy source) COMMAND MODE: CD1 $ Another unit (Copy destination) 23 CDP-C305 MECHANISM ADJUSTMENT MODE This mode is used for mechanism adjustments. Refer to the section on Mechanism Adjustments. SHIPMENT MODE This mode is used for setting the unit to the shipment state. Do not execute it without a proper reason as it erases the memory of the title memo recorded by the customer. Procedure: Set the COMMAND MODE switch to CD1 and the TIMER switch to OFF. Next, with the power ON, while pressing the GROUP 5 button and button, press the +100 button. If the switch state is normal, the model name will be displayed on the fluorescent indicator tube and the unit will set into the shipment mode. If the various switches are not set to their designated positions, error codes will be displayed on the fluorescent indicator tube. TITLE MEMO RECORDING CHECK MODE This mode is not required for servicing. If executed, the memory of the title memo recorded by the customer will be erased. 24 CDP-C305 SECTION 5 TEST MODE 5-1. Press the GROUP 2 button to raise the pop up part. Remove the cover (chassis), loosen the adjusting screw, move the screwdriver left and right until the lever (POP UP) does not touch the slit wall, and secure the screw. (Fig-2) The following buttons have special functions in this mode. GROUP 1 GROUP 5 GROUP 2 GROUP 6 button: Loading mechanism IN operation button: Loading mechanism OUT operation button: Pop up part UP operation button: Pop up part DOWN operation GROUP1 GROUP2 GROUP4 Cover (chassis) Lever (pop up) Fix to the center so that the lever (POP UP) does not touch the slit. At this position, this part will be locked. FIg-1 FIg-2 26 CDP-C305 Sensor Adjustment 1. With the power ON, while pressing the GROUP 4 and buttons, press the +100 button to enter the mechanism adjustment mode. Press the GROUP 1 button to operate the loading mechanism, and continue pressing until the disc table locks. Loosen the fixing screw, move the holder (TABLE SENSOR) slightly, and when the LED (green) of the PLAY button switches to the LED (orange) of the PAUSE button (or vice versa), secure the holder (TABLE SENSOR). Moving the disc table right and left with a hand after the screw is fixed, the table will move by the play of a disc table. If the LEDs light up alternately, the adjustment will be performed correctly. (Fig-4) GROUP1 PAUSE button GROUP4 PLAY button Linked with P indicator Linked with indicator PLAY indicator PAUSE indicator At this position, this part will be locked. FIg-3 Fixed screws Holder (table sensor) Table assembly Swing FIg-4 27 CDP-C305 6-2. CD Block is basically designed to operate without adjustment. [. . . ] No. Part No. Description Description 27PF 22PF 0. 1uF 5% 5% Remarks 50V 50V 25V A-4727-737-A BD BOARD, COMPLETE ******************* < CAPACITOR > 1-162-920-11 CERAMIC CHIP 1-162-919-11 CERAMIC CHIP 1-164-156-11 CERAMIC CHIP < CONNECTOR > C101 C102 C103 C110 C111 C112 C120 C121 C122 C123 C124 C125 C126 C127 C128 C130 C131 C132 C134 C135 C136 C137 C138 C139 C142 C145 C150 C151 C152 C158 C171 C172 C173 C174 C181 C182 C183 C184 C191 C192 1-164-315-11 1-164-156-11 1-164-315-11 1-126-947-11 1-164-156-11 1-164-156-11 1-164-156-11 1-162-970-11 1-117-863-11 1-162-927-11 1-162-967-11 1-162-966-11 1-107-826-11 1-164-156-11 1-164-156-11 1-164-505-11 1-164-505-11 1-164-505-11 1-124-589-11 1-124-589-11 1-107-826-11 1-124-584-00 1-162-964-11 1-162-915-11 1-164-156-11 1-162-908-11 1-126-947-11 1-164-156-11 1-107-826-11 1-162-966-11 1-126-947-11 1-164-156-11 1-162-927-11 1-115-412-11 1-126-947-11 1-164-156-11 1-162-927-11 1-115-412-11 1-126-947-11 1-164-156-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP 470PF 0. 1uF 470PF 47uF 0. 1uF 0. 1uF 0. 1uF 0. 01uF 0. 47uF 100PF 5. 00% 50V 25V 5. 00% 50V 20. 00% 10V 25V 25V 25V 10% 25V 10. 00% 6. 3V 5% 50V 50V 50V 16V 25V 25V 16V 16V 16V 16V 16V 16V 10V 50V 50V 25V CN101 CN102 1-784-745-11 CONNECTOR, FFC 23P 1-793-907-11 CONNECTOR, FFC/FPC 16P < FERRITE BEAD > FB191 FB192 1-414-234-22 FERRITE 1-414-234-22 FERRITE < IC > 0UH 0UH 0. 0033uF 10% 0. 0022uF 10% 0. 1uF 10. 00% 0. 1uF 0. 1uF 2. 2uF 2. 2uF 2. 2uF 47uF 47uF 0. 1uF 100uF 0. 001uF 10PF 0. 1uF 3PF 47uF 0. 1uF 0. 1uF 0. 0022uF 47uF 0. 1uF 100PF 680PF 47uF 0. 1uF 100PF 680PF 47uF 0. 1uF IC101 IC131 IC150 8-752-386-85 IC CXD2587Q 8-752-089-74 IC CXA2581N-T4 8-759-677-90 IC BA5947FP-E2 < TRANSISTOR > Q131 Q132 8-729-010-08 TRANSISTOR 8-729-600-22 TRANSISTOR < RESISTOR > MSB710-RT1 2SA1235TP-1EF 20% 20% 10. 00% 20% 10% 5. 00% R101 R102 R103 R110 R111 R112 R113 R120 R121 R122 R123 R125 R126 R127 R129 R131 R132 R134 R135 R136 1-216-833-11 1-216-845-11 1-216-833-11 1-216-821-11 1-216-821-11 1-216-845-11 1-216-864-11 1-216-839-11 1-216-833-11 1-216-845-11 1-216-857-11 1-216-825-11 1-216-833-11 1-216-821-11 1-216-815-11 1-216-845-11 1-216-841-11 1-216-853-11 1-216-833-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 100K 10K 1K 1K 100K 0 33K 10K 100K 1M 2. 2K 10K 1K 330 100K 47K 470K 10K 10K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 8. 33% 50V 20. 00% 10V 25V 10. 00% 16V 10% 50V 20. 00% 10V 25V 5% 50V 5. 00% 25V 20. 00% 10V 25V 5% 50V 5. 00% 25V 20. 00% 10V 25V 64 CDP-C305 BD Ref. R137 R138 R139 R140 R141 R142 R143 R144 R145 R146 R149 R151 R152 R153 R155 R171 R172 R173 R181 R182 R183 R191 R192 D. 1-216-797-11 1-216-797-11 1-216-849-11 1-216-857-11 1-216-841-11 1-216-845-11 1-216-841-11 1-216-846-11 1-216-829-11 1-216-841-11 1-216-821-11 1-216-853-11 1-216-849-11 1-216-864-11 1-216-864-11 1-216-835-11 1-216-835-11 1-216-835-11 1-216-835-11 1-216-835-11 D. SENS (IN) 10 10 220K 1M 47K 100K 47K 120K 4. 7K 47K 1K 470K 220K 0 0 15K 15K 15K 15K 15K 15K 560 100 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% D. [. . . ]