User manual SONY CDP-C450Z

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Before operating the player, check that the operating voltage of the player is identical with your local power supply. The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off. [. . . ] Each time you press the button, the playing time changes cyclically. The next or succeeding tracks The current or preceding tracks A specific track directly A track by scanning each track for 10 seconds (Music Scan) ± repeatedly until you find the track repeatedly until you find the track Number button of the track MUSIC SCAN before you start playing. ) When you find the track you want, press · When the disc is played in ) (forward) or 0 (backward) and A point while monitoring the sound hold down until you find the point A point quickly by ) (forward) or 0 (backward) and observing the display hold down until you find the point. During pause You will not hear the sound during the operation. Press REPEAT repeatedly until "REPEAT" disappears from the display. You can repeat only the current track while the disc is played in Continuous Play. While the track you want is being played, press REPEAT repeatedly until "REPEAT 1" appears in the display. When you directly locate a track numbered over 10 Press >10 first, then the corresponding number buttons. Example: To play track number 30 Press >10 first, then 3 and 10. You can extend the playing time during Music Scan Press MUSIC SCAN repeatedly until the playing time you want (10, 20 or 30) appears in the display. ) Each time you press the button, the playing time changes cyclically. You can have the player "shuffle" tracks and play in a random order. The player shuffles all the tracks on all discs or on the disc you've specified. You can play discs/tracks repeatedly in any play mode. You can play all tracks on all discs in a random order. The indication appears while the player is "shuffling" the tracks. Each time you press the button, the last track will be cleared. DISC 1 ­ 5 to select the disc, then number buttons of the tracks to be added CLEAR until "ALL CLr" appears in the display. Create a new program following the programming procedure. The program remains even after the Program Play ends when you press · , you can play the same program again. Erase the last track in the program Add tracks to the end of the program Change the whole program completely The program remains until you erase it or turn off the player If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. [. . . ] Removing tracks from a clip 1 Before you start playing, press one of the MUSIC Press or ± to select the track you want to remove from the clip. The player starts playing the next track in the clip. Repeat Steps 2 and 3 to remove other tracks. When you've removed all tracks from the clip, the MUSIC CLIP button goes off after the player plays the last track in the clip. [. . . ]