User manual SONY CDP-CE105

[. . . ] Refer to them whenever you call upon your Sony dealer regarding this product. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Place the player in a location with adequate ventilation to prevent heat build-up in the player. ⷠDo not place the player on a soft surface such as a rug that might block the ventilation holes on the bottom. [. . . ] If there is no disc in the disc number, the disc tray rotates and plays the next disc. Note When the front cover is open, if the play of the current disc ends, the player stops playing. If you want to play other discs, close the front cover and press the DISC 1-5 button. Close the front cover and press · Pause Resume playing after pause Go to the next track Go back to the preceding track Go to the next disc Select a disc directly Remove the CD You can check information about the disc using the display. You can open the front cover while playing a disc so that you exchange a disc without interrupting the playing of the current disc. Checking the total number and playing time of the tracks Close the front cover. The display shows the current disc number, the total number of tracks and total playing time. If you select the Continuous Play and ALL DISCS, the exchanged disc number starts flashing. The play of the current disc ends, and a disc whose disc number is flashing starts playing. While the disc number is flashing, if you press any buttons, the flashing stops and the player returns to the mode before the disc was exchanged. The double-circle around a disc number indicates the disc is ready to be played. ⷠWhen a disc compartment is recognized as empty, the disc number disappears. You can locate any disc before or while playing a disc. While playing a disc, the display shows the current disc number, track number, and playing time of the track. You can quickly locate any track while playing a disc using the 0/)± (AMS: Automatic Music Sensor) buttons. You can also locate a specific point in a track while playing a disc. When the disc is played in All the tracks on all discs All the tracks on the current disc All the tracks on all discs in random order All the tracks on the current disc in random order The same program Press REPEAT repeatedly until "REPEAT" disappears from the display. )± repeatedly until you find the track 0 repeatedly until you find the track You can repeat the current track. While the track you want is being played, press REPEAT repeatedly until "REPEAT 1" appears in the display. A point while )± (forward) or 0 monitoring the sound (backward) and hold down until you find the point )± (forward) or 0 A point quickly by observing the display (backward) and hold down until you find the point. You will not hear the during pause sound during the operation. You can have the player "shuffle" tracks and play in random order. [. . . ] Create a new program following the programming procedure. If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. 6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up block with 7 mm aperture. [. . . ]