User manual SONY CDP-CE375

[. . . ] This Class B digital apparatus complies with Canadian ICES-003. The instructions in this manual are for CDP-CE375 and CDP-CE275. cDP-CE375 is the model used for illustration purposes only. Any difference in operation is clearly indicated in the text, for example, "CDP-CE375 only. [. . . ] Playing time and number on the current track t Remaining time on the current track t Remaining time on the disc Even if the player is playing a disc, it doesn't stop playing. When the disc has more than 24 tracks, "­ ­ . The remaining time on the disc appears only when the disc is played in Continuous Play. The player plays the disc on the left side compartment after the current disc, and then the one on the right side compartment. The disc tray turns and other two disc compartments appear. If the playback of the current disc ends, the player stops playing. If the disc is played in 1 DISC Repeat Play mode (see page 8), the current disc starts playing again. In Program Play mode (see page 11), only the tracks on the current disc are played. ⷠDo not push the disc tray to close it in Step 5, as you may damage the player. You can arrange the order of the tracks on the discs and create your own program. The program can contain up to 32 "steps" -- one "step" may contain a track or a whole disc. If a program is already stored, the last step of the program appears in the display. When you want to erase the whole program, hold down CLEAR until "ALL CLr" appears in the display (see page 12). When you want to program the whole disc as one step, skip Step 3, and go to Step 4. 3 Turn lAMSL until the track you You can create your program while checking the disc labels. While the disc tray is open, follow Steps 1 to 4 with pressing the DISC SKIP button to check the disc labels. If you close the disc tray before Step 5, the total playing time appears in the display after a while. Note that, if the programmed track number isn't found on the disc, that step is automatically erased. When you press the H button, you can play the same program again. ⷠThe program remains until you erase it or turn off the player. If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. [. . . ] Example: When the tape length of one side is 30 minutes and 15 seconds 1 To set the minutes, turn l AMS L until "30" appears in the display, then push l AMS L. 2 To set the seconds, turn l AMS L until "15" appears in the display, then push l AMS L. After scanning all the tracks, the player repeats the portion with the highest peak level. The portion with the highest level may differ every time you try the adjustment on the same disc. [. . . ]