User manual SONY CDP-CE405

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions. The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] Each time you press the button, the playing time changes cyclically. The next or succeeding tracks The current or preceding tracks A specific track directly A track by scanning each track for 10 seconds (Music Scan) ± repeatedly until you find the track repeatedly until you find the track Number button of the track MUSIC SCAN before you start playing. ) When you find the track you want, press · When the disc is played in ) (forward) or 0 (backward) and A point while monitoring the sound hold down until you find the point A point quickly by ) (forward) or 0 (backward) and observing the display hold down until you find the point. During pause You will not hear the sound during the operation. Press REPEAT repeatedly until "REPEAT" disappears from the display. You can repeat only the current track while the disc is played in Continuous Play. While the track you want is being played, press REPEAT repeatedly until "REPEAT 1" appears in the display. When you directly locate a track numbered over 10 Press >10 first, then the corresponding number buttons. Example: To play track number 30 Press >10 first, then 3 and 10. You can extend the playing time during Music Scan Press MUSIC SCAN repeatedly until the playing time you want (10, 20 or 30) appears in the display. ) Each time you press the button, the playing time changes cyclically. You can have the player "shuffle" tracks and play in a random order. The player shuffles all the tracks on all discs or on the disc you've specified. You can play discs/tracks repeatedly in any play mode. You can play all tracks on all discs in a random order. You can change your programme before you start playing. CHECK until the track you don't want appears in the display, then press CLEAR CLEAR. Each time you press the button, the last track will be cleared. DISC 1 ­ 5 to select the disc, then number buttons of the tracks to be added CLEAR until "ALL CLr" appears in the display. Create a new programme following the programming procedure. The programme remains even after the Programme Play ends when you press · , you can play the same programme again. Erase the last track in the programme Add tracks to the end of the programme Change the whole programme completely The programme remains until you erase it or turn off the player If you replace discs, the programmed disc and track numbers remain. [. . . ] Repeat Steps 2 and 3 to remove other tracks. When you've removed all tracks from the clip, the MUSIC CLIP button goes off after the player plays the last track in the clip. You can delete unwanted tracks during playback press CLEAR while playing the track. The player starts playing the next track. [. . . ]